Description
The .450 Bushmaster is a straight-wall cartridge that headspaces off the case mouth, which means it calls for a taper crimp rather than a roll crimp. That is exactly what this Hornady Custom Grade die is built to do. It removes the flare from the case mouth and tapers the brass gently into the bullet while leaving a clean, square edge intact so your rounds headspace the way they should. For anyone running a big-bore AR or a bolt gun in .450, getting the crimp right is the difference between smooth cycling and bullets walking around under recoil.
Why the .450 Bushmaster Taper Crimp Die Earns Its Spot
Because this cartridge stops on the case mouth inside the chamber, you can't lean on a roll crimp to hold your bullet. A taper crimp is the correct approach, and plenty of folks loading .450 report smooth, flawless feeding when they bring their case mouth down to around .474 to .475 inch. That extra hold-back force matters in semi-autos, where the slamming of the action can shove a loosely held bullet deeper into the case and spike pressure. This die handles that final step cleanly.
Setting Up the Hornady 044176 Crimp Die
The die uses standard 7/8-14 threads, so it drops right into any common single-stage or progressive press. It ships with Hornady's Sure-Loc lock ring, which wraps the full circumference of the die and clamps down without the set screw ever biting into the threads, so your adjustment stays put once you find your sweet spot. Keep in mind a shell holder is not included, since most reloaders already have the right one on the bench.
Built to Hornady Custom Grade Standards
This is a single die meant to run alongside your sizing and seating dies rather than replace them. It carries Hornady's reputation for clean machining and consistent results, and it's covered by their lifetime warranty. A quick wipe of One Shot case lube or degreaser on the metal before first use is a smart habit and keeps everything running smooth for the long haul.
Key Specifications
- Manufacturer: Hornady
- Caliber: .450 Bushmaster
- Die Type: Taper Crimp Die
- Crimp Style: Taper
- Number of Dies: 1
- Thread Size: 7/8-14
- Gun Type: Rifle
- Shell Holder Included: No
- Lock Ring: Hornady Sure-Loc
- Series: Custom Grade New Dimension
- Country of Origin: United States
- Manufacturer Part Number: 044176
- UPC: 090255441765
What’s Included
- Hornady .450 Bushmaster Taper Crimp Die (1)
- Hornady Sure-Loc die locking ring
Frequently Asked Questions
Why does .450 Bushmaster need a taper crimp instead of a roll crimp?
The .450 Bushmaster headspaces off the case mouth, just like 9mm or .45 ACP. A roll crimp bends the mouth inward and takes away that square edge the cartridge needs to stop correctly in the chamber. A taper crimp tightens the mouth against the bullet while keeping that edge intact, which is why it's the right tool for this cartridge.
Does this Hornady taper crimp die come with a shell holder?
No, a shell holder is not included with this die. Most reloaders already have the correct shell holder for the .450 case head on hand, so you'll want to make sure you have the right one before you start loading.
Will the 044176 die fit my press?
Yes, it uses the industry-standard 7/8-14 thread, so it will thread into any common single-stage or progressive reloading press. It also includes a Hornady Sure-Loc lock ring that holds your setting without the set screw digging into the threads.
Do I still need my other dies if I buy this one?
Yes. This is a standalone taper crimp die that runs as the final step in your process. You'll still need a sizing die and a seating die to size your brass and seat the bullet before you apply the crimp with this one.




Reviews
There are no reviews yet.