0
0

Hornady Custom Grade 45-70 Government Bullet Seater Die 044152

UPC: 090255441529

$29.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Hornady Custom Grade 45-70 Government Bullet Seater Die is the piece that handles the final, most important step of loading your big-bore rounds: dropping the bullet in straight and holding your overall length where you want it. It's machined from select heat-treated steel and built to the same standard across Hornady's lineup, so you're getting a die that's meant to outlast the rest of your gear. This is the standalone seater sized for the .458 diameter bullets used in 45-70 Government, and it works for .450 Marlin as well.

What Sets the Custom Grade Seater Apart

The heart of this die is the in-line, floating bullet alignment sleeve. Before the bullet ever touches the case mouth, the sleeve holds the bullet, case neck, and seating stem in alignment, which keeps concentricity tight and base deformation off the table. For a cartridge like the 45-70 that leans on heavy cast and jacketed bullets, that straightness pays off at the muzzle. The seating adjustment screw dials in your depth simply, and a compression washer gives you the tension to make fine tweaks without the setting wandering.

Crimping and Cleanup on the 45-70 Seater Die

There's a built-in crimp ring you can run or raise out of the way for no crimp at all. For tube-fed lever guns chambered in 45-70, a good roll crimp helps keep bullets from setting back under recoil, and this die lets you seat and crimp in the same stroke. When it's time to clean, the retainer ring pops off in seconds so you can get at the internals without any special tools. One thing worth knowing: if you're loading Hornady's 325 grain FTX bullets, that specific projectile may call for a different seating stem to crimp properly, so it's worth checking before you start a batch.

The die ships with Hornady's double-flat Sure-Loc lock ring already installed and a custom plastic storage box to keep it protected on the bench. A shell holder is sold separately, so grab the right one for your press if you don't already have it.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 044152
  • UPC: 090255441529
  • Die Type: Bullet Seating Die
  • Series: Custom Grade New Dimension
  • Caliber: 45-70 Government / .450 Marlin
  • Bullet Diameter: .458
  • Crimp: Built-in roll crimp (optional use)
  • Material: Heat-treated steel
  • Lock Ring: Hornady Sure-Loc double-flat, installed
  • Country of Origin: Made in USA
  • Warranty: Hornady No-Risk Lifetime Warranty

What’s Included

  • Hornady Custom Grade 45-70 Government bullet seater die (1)
  • Hornady Sure-Loc double-flat lock ring (installed)
  • Custom plastic storage box

Frequently Asked Questions

Does the 45-70 seater die come with a shell holder?

No, the shell holder is sold separately. You'll want to match the correct shell holder to the 45-70 Government case and your press if you don't already have one on hand.

Can the Custom Grade 45-70 seater die crimp as well as seat?

Yes. It has a built-in roll crimp you can use to seat and crimp in the same stroke, which is handy for tube-fed lever guns. You can also raise the crimp ring out of the way to seat with no crimp at all.

Will this die work with Hornady 325 grain FTX bullets?

The die will seat them, but the FTX profile can require a different seating stem to crimp properly on the 45-70. If you plan to run FTX bullets, it's worth contacting Hornady to confirm the correct stem part number before you load a batch.

Is this a complete die set or just the seater?

This is the standalone bullet seater die only, not a full set. If you're building a load from the ground up you'll also need a sizing die and the appropriate shell holder for 45-70 Government.

Additional information

UPC

090255441529

Manufacturer

Manufacturer Part Number

044152

Reviews

There are no reviews yet.

Be the first to review “Hornady Custom Grade 45-70 Government Bullet Seater Die 044152”