Description
If you cast your own .416 caliber bullets, these Hornady gas checks are the piece that lets you run those slugs at higher velocities without the headaches. Each one is a small copper cup that fits onto the rebated base of a gas check style bullet. During sizing, it crimps tight to the bullet and forms a protective cap that seals burning propellant gases and keeps the hot gas from cutting into the soft lead base. The result is cleaner barrels, better consistency, and the freedom to load cast bullets closer to jacketed performance.
Why .416 Casters Reach for These Copper Checks
Copper is the material of choice here for a reason. It holds up against corrosion for a long shelf life and gives you that harder, more uniform base that lead alone can't provide. The check obturates to seal the bore, helps the bullet grip the rifling, and scrapes a bit of buildup as it travels down the barrel. For big bore rifle work in cartridges like the .416 Ruger, .416 Rigby, and .416 Remington Magnum, that extra protection makes load development a lot more forgiving.
Installing the .416 Gas Checks on Your Cast Bullets
The process is simple and quick. Your bullet needs to be cast from a gas check design mold, meaning it has that slightly reduced diameter step at the base. You lube the bullet, snap a check onto the base by hand, then run it through a caliber specific sizing die. The pressure of the push seats and crimps the check squarely onto the bullet in one motion. A lot of folks sit down with a can of bullets and a box of checks and knock out a big batch at once before heading to the sizer.
These ship 1,000 to the box, which keeps a serious .416 caster stocked for a good long while. If you're recycling your own lead, the gas check becomes about the only component you keep buying, which is part of what makes casting so appealing in the first place.
Key Specifications
- Manufacturer: Hornady
- Caliber: .416
- Type: Crimp-On Gas Check
- Material: Copper
- Quantity: 1,000 per box
- Manufacturer Part Number: 7125
- UPC: 090255271256
- Country of Origin: United States
What’s Included
- 1,000 Hornady .416 caliber crimp-on gas checks
Frequently Asked Questions
What does a .416 caliber gas check actually do?
It's a thin copper cup that crimps onto the base of your cast bullet during sizing. It seals burning propellant gases and protects the soft lead base from deformation and gas cutting. That lets you run cast bullets at higher velocities with less lead fouling in the bore.
How do I install these Hornady gas checks?
Lube your bullet, snap a check onto the base by hand, then push it through a caliber specific sizing die. The pressure seats and crimps the check squarely onto the bullet in a single pass. Many casters pre-snap a full batch of checks onto bullets first, then size and lube them all at once.
Will these work with any .416 cast bullet?
They're designed for bullets cast from a gas check style mold, which have a slightly reduced step at the base to accept the check. A plain base bullet won't take a gas check properly. If your mold is listed as a gas check design, these are the right fit for .416 diameter.
Why copper instead of aluminum?
Copper resists corrosion for a long shelf life and gives you a consistent, harder base surface. It obturates well to seal the bore and helps the bullet engage the rifling. For big bore .416 loads, that reliability is worth it.





Reviews
There are no reviews yet.