Description
There's a certain kind of screw or bolt that laughs at penetrating oil, heat, and every screwdriver in the drawer. That's exactly what the Lisle 29000 hand impact driver was built for. You seat the tool on the fastener, give it a solid rap with a hammer, and the internal mechanism converts that downward blow into rotational force, twisting the fastener loose while the hammer strike keeps the bit firmly seated so it doesn't cam out and chew up the head.
What the Lisle 29000 Impact Driver Brings to the Bench
This is the tool by itself, with a 3/8-inch square drive. The unique design delivers over 200 ft-lbs of what Lisle calls shock torque, which is more than enough to free rusted or frozen nuts, bolts, and screws that would otherwise strip out. It's fully reversible too, so once you back a corroded screw loose you can flip it and snug fasteners back down. Because it runs a 3/8-inch square drive, it also accepts impact sockets, which opens it up to more than just screw heads.
Why Gunsmiths Reach for a Hand Impact Driver
Anybody who's fought a buggered action screw or a factory-torqued grip bolt knows the frustration. The controlled hammer blow keeps constant pressure on the bit while it turns, which is why smiths lean on tools like this for stuck screws on rifles, revolvers, and old guns that have been sitting for decades. The same trait makes it handy well beyond firearms, from automotive brake and rotor hardware to any Phillips or slotted fastener that's dug in and refusing to move.
Lisle has been building tools in Clarinda, Iowa since 1903, and that reputation for stout, no-nonsense gear shows here. This is a buy-it-once tool that lives in the box until the day nothing else works, and then it earns its keep in a couple of whacks. If you'd rather have the driver bundled with a bit assortment, Lisle offers the 29200 set version, but the 29000 is the standalone driver for folks who already have bits or want to run impact sockets.
Key Specifications
- Manufacturer: Lisle Corporation
- Manufacturer Part Number: 29000
- UPC: 083045290001
- Style: Handle
- Drive Size: 3/8" square drive
- Shock Torque: Over 200 ft-lbs
- Reversible: Yes, loosens and tightens
- Socket Compatible: Accepts 3/8" impact sockets
- Handle Color: Green
- Case Included: No
- Shipping Weight: 1.70 lbs
What’s Included
- Lisle 29000 3/8" hand impact driver tool (sold individually, no bits or case)
Frequently Asked Questions
Does the Lisle 29000 impact driver come with bits?
No, the 29000 is the standalone hand impact tool with a 3/8-inch square drive and does not include bits or a storage case. It's designed for folks who already have compatible bits or plan to run impact sockets. If you want the driver bundled with Phillips and straight slot bits, Lisle offers the 29200 set instead.
How does a hand impact driver actually work?
You seat the tool on a stuck fastener, then strike the end with a hammer. The internal mechanism converts that straight-down blow into rotational force, turning the fastener while the hammer strike keeps the bit pressed firmly in place. That combination is what breaks loose rusted screws without stripping the head.
Can I use this impact driver for gunsmithing work?
Yes, this style of hand impact driver is a longtime favorite for freeing seized action screws, grip bolts, and other stubborn fasteners on firearms. The controlled hammer blow keeps the bit seated so you're far less likely to slip and mar the screw head. Just be sure to use a properly fitting bit for the fastener you're working on.
Can it tighten fasteners too, or only loosen them?
It works both ways. The tool is reversible, so you can set it to loosen a frozen fastener and then flip it to tighten one back down. It also accepts 3/8-inch impact sockets, which extends its use beyond just screw heads.



Reviews
There are no reviews yet.