Description
The RCBS Steel Neck Die Bushing in .288 diameter is one of those small parts that makes a big difference at the bench. Swapping bushings lets you fine-tune exactly how much grip your case neck puts on the bullet, which is a huge deal for anyone chasing consistency and single-hole groups. It drops right into your RCBS Gold Medal Match bushing-style sizing dies and sets up fast.
How the .288 Neck Bushing Earns Its Keep
Sizing only the amount of brass you need means less work hardening on the case neck. That translates to brass that lasts longer and necks that stay more uniform load after load. The self-centering design keeps everything aligned so each piece of brass comes out the same, which is really the whole point when you're loading for accuracy with precision rifle setups.
Picking the Right Bushing Size
Getting the size dialed in is simple. Measure the outside neck diameter of a loaded round and subtract about .002 to .003 inches, which leaves roughly .001 inch of spring-back for proper neck tension. You can also double your neck wall thickness, add bullet diameter, then subtract .001 inch. A lot of reloaders like to keep a bushing or two above and below their target number on hand so they can tune tension to a specific load or lot of brass.
Built for the Precision Crowd
Made from steel with a silver finish, this bushing is the same style used by bench rest and long-range precision shooters who want repeatable results. Keep in mind it relies on brass with consistent neck wall thickness to deliver its best, so pairing it with sorted or turned brass is where it really shines. If you're already running Gold Medal Match dies, adding the right bushing is one of the easiest upgrades you can make to your loading process.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 81603
- UPC: 076683816030
- Diameter: .288 in
- Material: Steel
- Color: Silver
- Type: Self-Centering Neck Sizing Bushing
- Compatibility: RCBS Gold Medal Match / Matchmaster Bushing Dies
- Quantity: 1 Bushing
What’s Included
- One RCBS .288 Steel Neck Die Bushing
Frequently Asked Questions
What dies does the .288 steel neck die bushing fit?
This bushing is made for RCBS Gold Medal Match and Matchmaster bushing-style sizing dies. It works in both the full-length and neck-sizing versions of those dies. It is not a standalone die, so you'll need the matching RCBS bushing die to use it.
How do I know if .288 is the right bushing size for me?
Measure the outside neck diameter of a loaded round and subtract about .002 to .003 inches, which leaves roughly .001 inch of brass spring-back for correct neck tension. You can also double your neck wall thickness, add your bullet diameter, then subtract .001 inch. If your math lands near .288, this is your bushing, though many reloaders keep one size above and below on hand to fine-tune.
Does using a neck bushing really help case life?
Yes. Because the bushing only sizes the amount of neck you choose, it reduces work hardening of the brass compared to sizing the whole neck down and expanding it back up. That means your cases stay more uniform and last through more loadings.
Does my brass need any prep to get the most out of this bushing?
For best results, your brass should have consistent neck wall thickness, since the bushing sizes based on the outside of the neck. Sorted or neck-turned brass will give you the most uniform tension from piece to piece. Inconsistent brass will still size, but you won't see the full accuracy benefit.





Reviews
There are no reviews yet.