$25.99
8 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Marlin 60 is one of the most popular .22 rimfires ever made, but those thin factory iron sights can be a real chore on aging eyes or in fading light. This Williams Fire Sight set fixes that in a hurry. It swaps in a bright red front bead paired with a green U-shaped fiber optic rear, and the color contrast between the two makes lining up your shot almost effortless. Once the light catches those fibers, they glow, and target acquisition gets a whole lot quicker.
The rear sight is fully adjustable for both windage and elevation, so you can dial in your zero and keep it there. The front is a steel bead that replaces the existing factory bead, and this set fits standard 3/8-inch dovetails found across a bunch of Marlin rimfires beyond just the 60, including the 925, 925M, 915Y, 983T, 981T, and 795. No gunsmithing is needed to get these on your rifle.
Most folks have both sights on in about 20 minutes with basic tools. The front typically screws right on, while the rear slides into the dovetail. If yours goes in tight, that's normal for a dovetail fit. A gentle tap with a nylon or brass hammer usually seats it, and some shooters lightly dress the base to get a smooth slide-in. A tight fit is a good thing here since it keeps the sight from wandering under recoil.
Where this set really earns its keep is at the range. Plenty of owners report shooting tighter groups right out of the gate and finally being able to see their sights clearly in low light and against dark backgrounds. For anyone who loves plinking or small game hunting with a Marlin 60, it's a cheap upgrade that pays off every time you raise the rifle.
Yes, this set is designed for the Marlin 60 and drops into the standard 3/8-inch dovetail. It also fits several other Marlin rimfires including the 925, 925M, 915Y, 983T, 981T, and 795. No gunsmithing is required to install it.
The rear sight is a dovetail fit, so it can go in snug, which is exactly what you want to keep it locked in place. Most people seat it with a light tap from a nylon or brass hammer, and some lightly dress the base for a smoother slide. Plan on a little patience and it usually takes about 20 minutes total for both sights.
The difference is night and day for most shooters. The bright red front and green rear light up in daylight and are far easier to see than the thin stock irons, especially in low light or against dark backgrounds. Many owners report faster target acquisition and tighter groups right away.
Yes, the rear sight is fully adjustable for both windage and elevation, so you can zero the rifle and keep it dialed in. The bright fiber optic front bead gives you a clear reference point once everything is set. Sighting in is straightforward at the range.
| UPC | 053506707423 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 70742 |
| Color | Multi |
| Model | |
| Style | Fiber Optic |
You must be logged in to post a review.
Reviews
There are no reviews yet.