Description
Anyone who has stripped a hex socket wrestling with a stubby Allen key will appreciate what this Bondhus set brings to the bench. It covers nine metric sizes from 1.5mm up to 10mm, giving you a full spread of ball-end hex drivers that seat cleanly in the fastener and let you spin screws in and out with real control. For gunsmithing work, scope ring screws, mount fasteners, and countless action screws use hex sockets, and having a dedicated driver instead of an L-key makes those jobs faster and a lot easier on your knuckles.
What Sets the Bondhus Balldriver Set Apart
These aren't ordinary drivers. Bondhus builds the blades from its own Protanium High Torque steel, which runs up to 20% stronger with roughly twice the wear resistance of standard tool steels. The ProGuard finish does more than look sharp; it fights corrosion far better than typical coatings, so the tips hold up in a shop where oil, solvents, and humidity are part of daily life. Every tool is made in the USA and backed by a full lifetime warranty, which tells you Bondhus stands behind the steel.
Getting Into Tight Spots With the 1.5mm-10mm Hex Set
The ball end is the real trick here. It lets you drive a screw at an angle up to about 25 to 30 degrees, so you can reach fasteners that sit behind a rail, under a scope, or down in a recessed pocket where a straight driver simply won't line up. The two-part ComfortGrip handles pair a tough thermoplastic core with a soft rubber outer shell, and they're sized in proportion to each blade so the smaller drivers keep you from over-torquing a delicate screw while the larger ones give you the leverage you need.
Why the Bondhus Hex Screwdriver Set Earns Bench Space
The handles are color coded and stamped with their size, so grabbing the right one is quick even mid-project. The set also stores in a reusable case that keeps every driver in its slot. For a gunsmith, hobbyist, or anyone who works on machinery, bikes, or furniture, this is one of those sets you buy once and keep reaching for.
Key Specifications
- Manufacturer: Bondhus
- Manufacturer Part Number: 10699
- Model: BSX9M
- UPC: 037231106997
- Number of Pieces: 9
- Style: Hex / Ball End
- Size Range: 1.5mm – 10mm
- Sizes Included: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm
- System of Measurement: Metric
- Blade Material: Protanium High Torque Steel
- Finish: ProGuard Corrosion-Resistant
- Handle: Two-Component ComfortGrip
- Ball End Entry Angle: Up to 25 degrees
- Country of Origin: United States
- Warranty: Full Lifetime
What’s Included
- 9 metric ball-end hex screwdrivers (1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm)
- Reusable storage case
Frequently Asked Questions
What sizes come in the Bondhus 9-piece metric hex screwdriver set?
The set includes nine metric ball-end drivers covering 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm. That spread handles everything from small scope and mount screws up to larger action and accessory fasteners. The handles are color coded and stamped with each size so you can grab the right one fast.
What does the ball end do on these hex drivers?
The ball end lets the driver seat into a hex socket and turn the fastener at an angle rather than dead straight, up to about 25 to 30 degrees. That's a big help when a screw is tucked behind a rail, under a scope, or down in a recessed spot. For final tightening you'll still want the driver square, but the angle makes reaching and starting screws much easier.
Are these Bondhus screwdrivers made in the USA?
Yes, this set is made in the USA using Bondhus Protanium High Torque steel, which runs up to 20% stronger with roughly twice the wear resistance of standard tool steels. The ProGuard finish adds strong corrosion resistance for shop conditions. Bondhus also backs the set with a full lifetime warranty.
Is this hex screwdriver set good for gunsmithing?
It's a solid fit for gunsmith work since so many firearm fasteners use hex sockets, including scope ring screws, mount hardware, and many action screws. The proportioned handles help you apply the right torque without overdoing it on smaller screws. Having dedicated drivers instead of loose Allen keys speeds up mounting and maintenance jobs at the bench.





Reviews
There are no reviews yet.