0
0

Bondhus 8-Piece Ball End Hex Screwdriver Set .050-5/32 SAE (10632)

UPC: 037231106324

$23.99

7 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Anyone who works on firearms knows how many hex-head fasteners hide in awkward corners. Scope ring screws, base mounting screws, grip and trigger hardware, plenty of it sits at an angle you can't get a straight shot at. That's exactly where the Bondhus 8-Piece Ball End Hex Screwdriver Set earns its keep. Each driver has a ball-end tip that lets you engage a screw at up to a 25-degree angle, so you can turn fasteners in tight quarters without perfectly lining up the tool.

What Sets the Bondhus Balldriver Set Apart

These aren't cheap hex drivers rebranded and boxed up. Bondhus builds the blades from their proprietary Protanium high-torque steel, which runs up to 20 percent stronger than standard tool steels and carries roughly twice the wear resistance. The ProGuard finish adds real corrosion protection, resisting rust and solvents far better than typical coatings, which matters when your tools live near gun oils and cleaning chemicals. Bondhus has been making these since the company founder invented the Balldriver back in 1964, so the design has had plenty of time to get right.

Sizes and Feel in the Hand

The set covers eight common SAE inch sizes: .050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", and 5/32". That range hits most of the small hex hardware you'll run into on optics, mounts, and firearm internals. The ComfortGrip handles use a hard thermoplastic core wrapped in cushioned rubber, so they hold up under torque while staying comfortable and secure even when your hands are oily. Bondhus also sizes each handle to match the torque the blade tip can handle, which helps you avoid over-torquing and stripping a small screw head. The handles have an anti-roll feature too, so they stay put on the bench instead of rolling into the floor.

Backed by a lifetime warranty and made in the USA, this is the kind of set you buy once and keep on the bench for years.

Key Specifications

  • Manufacturer: Bondhus
  • Manufacturer Part Number: 10632
  • UPC: 037231106324
  • Number of Pieces: 8
  • Tip Type: Ball End Hex
  • Sizes: .050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32"
  • Measurement System: Standard (SAE/Inch)
  • Blade Material: Protanium High Torque Steel
  • Finish: ProGuard
  • Handle: ComfortGrip, two-component with anti-roll design
  • Angled Entry: Up to 25 degrees
  • Color: Black / Yellow
  • Country of Origin: Made in USA
  • Warranty: Lifetime

What’s Included

  • .050" Balldriver hex screwdriver
  • 1/16" Balldriver hex screwdriver
  • 5/64" Balldriver hex screwdriver
  • 3/32" Balldriver hex screwdriver
  • 7/64" Balldriver hex screwdriver
  • 1/8" Balldriver hex screwdriver
  • 9/64" Balldriver hex screwdriver
  • 5/32" Balldriver hex screwdriver

Frequently Asked Questions

What does the ball end on the Bondhus hex screwdriver set actually do?

The ball-shaped tip lets you engage a hex screw at an angle instead of requiring the driver to be perfectly straight. You can turn fasteners at up to a 25-degree angle, which is a big help for scope rings, mounts, and action screws tucked into tight spots. For maximum torque or breaking a screw loose, you'll still want to insert it straight, then switch to the angle once it's moving.

Are these SAE or metric sizes?

This is the SAE inch set, covering .050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", and 5/32". Most American-made optics and firearm hardware use inch hex sizes, so this range fits the majority of what you'll run into. If your gear uses metric hardware, Bondhus makes a matching metric set.

Is the Bondhus 10632 set really made in the USA?

Yes, this set is manufactured in the USA. The blades use Bondhus Protanium steel, which is rated up to 20 percent stronger than standard tool steel, and the whole set is backed by a lifetime warranty. It's a set built to stay on your bench for the long haul.

Will these strip small hex screws?

Bondhus designs each handle to match the torque the blade tip can safely handle, which helps prevent over-torquing that leads to stripped screws. As with any hex driver, make sure you're using the correct size for a snug fit and keep the tool seated fully in the socket. Used that way, these hold up well on delicate small fasteners.

Additional information

UPC

037231106324

Manufacturer

Manufacturer Part Number

10632

Style

Hex

Reviews

There are no reviews yet.

Be the first to review “Bondhus 8-Piece Ball End Hex Screwdriver Set .050-5/32 SAE (10632)”