Description
Anybody who runs a 338 Lapua knows the brass is expensive and the pressures are no joke, so keeping your cases in spec matters more here than almost anywhere else. This Lyman gauge gives you a fast, no-guesswork way to confirm your resized brass is sitting where it should before it ever gets near the chamber. You just drop a clean, sized case neck-first into the gauge and read the position of the case head against the stepped min and max surfaces. If it checks out, you're good. If it hangs long or sits short, you know before you've loaded a single round.
Why the 338 Lapua Gauge Earns a Spot on the Bench
This is a non-adjustable, one-piece machined metal tool, so there's nothing to set, calibrate, or knock out of alignment. It reads headspace from the case base to the datum line on the shoulder, which is exactly the dimension that controls how your round seats in the chamber. For a cartridge like the 338 Lapua that gets fired hard and resized often, catching shoulder bump problems early saves you from case head separation and the headaches that come with it.
Checking Case Length With the 338 Lapua Headspace Gauge
The same tool does double duty on case length. Stand the gauge on its base on a flat surface, drop your case in, and check where the mouth lands against the length steps. If the mouth pokes past the top, that case has grown and it's time to trim. Bottleneck brass stretches with repeated firings, and the 338 Lapua is no exception, so having a quick visual check right on the bench keeps your trim-to decisions simple.
It's a straightforward, built-to-last piece that belongs in the kit of anyone loading this round, whether you're a precision long-range handloader or just want the peace of mind that your brass is safe and consistent. Pair it with a good caliper and you've got your case prep inspection covered.
Key Specifications
- Manufacturer: Lyman
- Manufacturer Part Number: 7990345
- UPC: 011516703453
- Cartridge: .338 Lapua Magnum
- Type: Case Length / Headspace Gauge
- Material: Metal
- Design: One-piece, non-adjustable
- Length: 7.20 in
- Width: 1.55 in
- Height: 1.45 in
- Weight: 0.3 lbs
- Country of Origin: USA
What’s Included
- 338 Lapua Case Length/Headspace Gauge
Frequently Asked Questions
How do I use the 338 Lapua headspace gauge?
Clean and resize your brass first, then drop the case neck-first into the gauge. The position of the case head against the min and max steps tells you whether your headspace is in spec. To check length instead, stand the gauge on its base, drop the case in, and see where the mouth falls against the length steps.
Does this Lyman gauge check both headspace and case length?
Yes. It's a dual-purpose tool that reads headspace from the case base to the shoulder datum line and also flags cases that have grown past the maximum allowable length. That means one tool covers two of the most important case prep checks for your 338 Lapua brass.
Is the 338 Lapua gauge adjustable or does it need calibrating?
No. It's a non-adjustable, one-piece machined metal tool with nothing to set or calibrate. You just use it as-is, which makes it fast and foolproof on the bench.
Can I use it to check loaded rounds too?
Many reloaders use it as a quick chamber-style check on completed rounds before heading to the range as a final confirmation. Keep in mind the gauge is built to approximate standard chamber specs, so your own rifle's chamber is always the ultimate reference if you want to fine-tune shoulder bump.




Reviews
There are no reviews yet.