Description
Headspace is the distance from the closed breech face to the surface in the chamber where the cartridge seats, and on a rimmed round like the .22 LR that measurement is taken off the front of the rim. Get it wrong and you're looking at accuracy problems at best and an unsafe gun at worst. This Forster GO gauge gives you a quick, repeatable way to confirm your rimfire chamber is cut to the right minimum length, which is exactly what you want before putting rounds downrange through a fresh barrel or an older gun you're not sure about.
How the Forster 22 Rimfire GO Gage Works
This is the .043" GO gauge, which corresponds to the minimum chamber dimension for the .22 rimfire family. The idea is simple: drop it in the chamber and gently close the action. If the bolt closes fully on the GO gauge, your chamber will accept any ammunition loaded to industry maximum specs. That's the baseline every gunsmith checks against when fitting a new rimfire barrel or verifying a chamber is tight, accurate, and safe. For the full picture, folks typically pair this GO gauge with a NO-GO to confirm the chamber hasn't been cut too long.
Built to Forster's Precision Standards
Forster machines these from hardened steel and grinds them to an exacting tolerance of plus or minus .00015", then inspects them with NIST-certified measurement tools. That kind of precision is the whole point of a gauge like this. The caliber and gauge type are printed right on the side so there's no second-guessing which one you've got in hand, and it handles .22 Short, .22 Long, and .22 LR Match chambers.
Who Reaches for the 22 Rimfire GO Gage
This one lives in the toolbox of anyone cutting or checking rimfire chambers. Guys fitting a new match barrel to a CZ 457, Vudoo, or 40X use it to dial in headspace against a known standard rather than guessing with shim stock or feeler gauge tricks. A GO gauge is essential gear for a gunsmith or armorer, though it has fewer uses for the casual collector who isn't touching a chamber. If you're building or rebarreling a rimfire, this is the reference you want.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: HG22RIMG
- UPC: 757253004605
- Gauge Type: GO
- Caliber: .22 LR, .22 Short, .22 Long
- Chamber Dimension: .043" minimum
- Tolerance: +/- .00015"
- Material: Hardened Steel
- Color: Steel
- Country of Origin: United States
- Quantity: 1
What’s Included
- One Forster 22 Rimfire GO headspace gage (.043")
Frequently Asked Questions
What does the 22 Rimfire GO gage tell me?
If your action closes fully on this .043" GO gauge, your chamber meets the minimum dimension and will accept ammunition loaded to industry maximum specs. It confirms the chamber is cut long enough to safely and reliably chamber correct rounds. It's the first check most gunsmiths make on a freshly reamed rimfire chamber.
Do I need a NO-GO gauge too?
For a complete headspace check, yes. The GO gauge confirms the chamber isn't too short, while a NO-GO confirms it isn't cut too long. Most people fitting or verifying a rimfire chamber keep both on hand so they can confirm headspace falls in the right window.
Will this gage work for .22 Short and .22 Long, or just .22 LR?
It covers the whole rimfire family. Forster machines and hones this gauge for .22 Short, .22 Long, and .22 LR Match chambers since they share the same rim thickness. One gauge handles all of them.
How accurate is the Forster 22 Rimfire GO gage?
Forster grinds these from hardened steel to a tolerance of plus or minus .00015" and inspects them with NIST-certified measurement tools. That tight tolerance is what makes a gauge like this a trustworthy reference. The caliber and gauge type are printed on the body so you always know what you're holding.



Reviews
There are no reviews yet.