Description
The .410 has quietly become a legit turkey gun thanks to Tungsten Super Shot, and this Carlson's choke is what turns that little bore into a real head-popper. It's a Long Invector flush tube in the 1.9-inch length with a .385 diameter, tuned specifically to squeeze the most out of dense TSS payloads instead of the old lead loads the factory choke was built around.
Why This Carlson's .410 TSS Choke Patterns So Tight
TSS is the reason a .410 can even talk turkey these days. Tungsten Super Shot runs about 22 percent denser than heavyweight shot and roughly 56 percent denser than lead, so a small pellet still carries the energy needed to reach out and connect. Paired with the tighter constriction on this tube, that translates to a wall of pellets landing in a 10-inch circle at 40 yards. It's optimized for Federal Premium Heavyweight TSS loads but plays nice with just about any small-shot turkey ammo in the 7 to 9 range, and the Flite Control Flex wad on those Federal shells means you're not locked into one brand of choke.
Build and Fit on the 38032 Turkey Tube
This one's machined from 17-4 heat-treated stainless steel with a matte black finish, which matters more than it sounds. TSS is brutally hard, and cheaper chokes can wear out fast running it. The extended, knurled end lets you spin it in and out by hand at the truck without fighting a wrench. It fits the Long Invector pattern, so you're covered on the Browning BPS and Citori, CVA Scout, Henry, and the Mossberg 500 in .410.
Getting the Most Out of Your .410 Turkey Setup
Do yourself a favor and pattern it before you head to the woods. Every barrel throws TSS a little differently, and dialing in your load and distance ahead of time is the difference between a clean bird and a bad morning. Keep in mind this is built for shot only, so skip any steel larger than #4, slugs, or buckshot through it. Run the right TSS load through it and a .410 turns into a surprisingly serious longbeard rig.
Key Specifications
- Manufacturer: Carlson's Choke Tubes
- Manufacturer Part Number: 38032
- UPC: 723189380328
- Gauge: .410 Bore
- Choke Style: TSS Turkey
- Fit: Long Invector, 1.9-inch Flush
- Diameter: .385 in
- Material: 17-4 Heat-Treated Stainless Steel
- Finish: Matte Black
- End Design: Knurled, Extended for Easy Install
- Compatible Shotguns: Browning BPS/Citori, CVA Scout, Henry, Mossberg 500
- Optimized Loads: TSS / Small Shot 7-9
- Shipping Weight: 0.095 lb
What’s Included
- One Carlson's TSS Turkey Long Flush .410 Long Invector choke tube (38032)
Frequently Asked Questions
What shotguns does the Carlson's 38032 .410 TSS choke fit?
It's cut for the Long Invector 1.9-inch flush pattern, so it fits the Browning BPS and Citori, CVA Scout, Henry, and the Mossberg 500 in .410 bore. If you're not sure what your barrel is threaded for, check the markings on the barrel or your factory choke before ordering. When in doubt, match it against Carlson's interchange guide.
Can I run regular lead or steel loads through this TSS turkey choke?
It's built and tuned around dense small-shot turkey loads like TSS in sizes 7 through 9, which is where it patterns best. You can shoot lead through it, but keep it to shot only. Don't run steel larger than #4, slugs, sabots, or buckshot through any Carlson's turkey choke.
Do I really need a TSS-specific choke for my .410?
For turkey, it makes a real difference. TSS is much denser than lead, and a choke like this one is bored to hold those tiny, heavy pellets together into a tight pattern the factory .410 choke just can't match. That's what gives a little .410 the reach to make clean 40-yard head shots.
Should I pattern the choke before hunting with it?
Absolutely. Every barrel and load combo throws a slightly different pattern, so put a few TSS shells on paper at your expected distances first. Doing that shows you exactly where your dense core lands and how far you can stretch your shots with confidence.




Reviews
There are no reviews yet.