Description
If you're loading Hornady's 300 grain .338 A-Tip Match bullets, a standard seating stem isn't going to do those long aluminum tips any favors. This stem, part number 397144, is machined to the exact profile of that bullet so it makes contact where it should and seats rounds straight and consistent without scuffing or deforming the nose. For a projectile built around tip uniformity and center-of-gravity placement, protecting that tip during seating isn't a minor detail, it's the whole point.
Why the 397144 A-Tip Match Stem Matters
The A-Tip Match bullet is a different animal than a typical polymer-tipped match projectile. The precision-machined aluminum tip is longer than polymer tips, which shifts the bullet's center of gravity rearward to improve in-flight stability and cut down drag variability for tighter groups downrange. All of that engineering gets undermined if your seating stem pushes on the wrong part of the bullet or dents that tip. This stem is cut to match the ogive and nose of the 300 gr .338 A-Tip specifically, so the force transfers correctly and the bullet goes in dead straight.
Swapping the Stem Into Your Custom Grade Die
Installation is about as simple as it gets. You back out the standard seating stem from your Hornady Custom Grade seating die, thread this one in, set your depth, and you're loading. There's no special tooling or fuss involved. Keep in mind this stem is built for Hornady Custom Grade dies and won't fit other manufacturers' seating dies, so it's meant to live in that ecosystem.
Built for the .338 Long-Range Crowd
This is a tool for the precision and long-range reloader who's already committed to the A-Tip program in .338. If you're running 300 grain A-Tips through a .338 Lapua, .338 Norma, or similar long-range chambering, matching the seating stem to the bullet is one of those small moves that keeps your handloads as consistent as the bullets themselves. One stem per package, machined in the USA, and ready to drop in.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 397144
- UPC: 090255971446
- Model: A-Tip Match
- Series: Custom Bullet Seating Stems
- Caliber: 338 Cal (.338")
- Bullet Weight: 300 gr
- Compatible With: Hornady Custom Grade Dies / A-Tip Match Bullets
- Color: Silver
- Quantity: 1
- Length: 3.20"
- Country of Manufacture: USA
What’s Included
- (1) Hornady 397144 A-Tip Match Bullet Seating Stem, 338 Cal, 300 gr
Frequently Asked Questions
What dies does the Hornady 397144 A-Tip seating stem fit?
This stem is made to fit Hornady Custom Grade seating dies. It's not compatible with other manufacturers' dies, so plan on running it inside a Hornady Custom Grade seating die for your .338 loads.
Do I need this stem if I'm loading 300 gr .338 A-Tip Match bullets?
It's strongly recommended. The A-Tip's long aluminum tip has a different profile than standard bullets, and a stem machined to match that profile seats the bullet without pushing on the tip or distorting it. Using the correct stem helps keep your concentricity and seating depth consistent, which is the whole reason to shoot A-Tips in the first place.
How do I install the A-Tip seating stem?
Unthread the standard seating stem from your Hornady Custom Grade seating die, thread this one in its place, and reset your seating depth. It takes a minute or two with no special tools, and you're ready to load.
Will this stem work with other .338 bullets besides the A-Tip?
This stem is machined specifically to the profile of the 300 gr .338 A-Tip Match bullet, so it's built for that projectile. For other bullet shapes you'd want the seating stem matched to those bullets instead, since the contact surface is cut for the A-Tip nose.



Reviews
There are no reviews yet.