Description
The UTG ACCU-SYNC QR 34mm X-High rings are built for anyone running a 34mm tube optic who needs real height and a dependable quick-detach setup. These rings sit tall, with a 39mm center height and a 22mm saddle, giving you room for large objective bells up to about 78mm and plenty of clearance over bulky handguards or night vision setups. They clamp onto any standard Picatinny rail and take up three slots per ring, so make sure you've got the real estate before you start spacing them out.
What Sets the ACCU-SYNC QR Rings Apart
The quick-release system is where these earn their keep. Each ring uses a locking QD lever with tool-free tension adjustment, so you can dial in the clamping pressure by hand and pop the optic on or off without reaching for a wrench. Squared recoil stops bite into the rail and keep everything locked in place, which is why these hold a solid zero and return to it after you remove and reinstall. That makes them a smart pick if you swap glass between rifles or pull the scope for transport and storage.
Machining and Build Quality on the X-High Rings
Each ring is CNC machined from 6061-T6 aluminum and wears a matte black anodized finish. UTG cut lightening pockets into the bodies to shave weight without giving up strength, and the whole set tips the scale right around 5 ounces. All the edges and corners are rounded off, so they won't chew up your gear, snag on a sling, or get in the way when you're adjusting windage and elevation turrets. The rings carry a .338 Lapua Magnum caliber rating, so they're more than stout enough for hard-recoiling precision builds.
UTG recommends torquing the ring top screws to 25 inch-pounds, and a T20 driver handles those. People who run these tend to be surprised at the fit and finish for the price, with plenty noting the return to zero holds up round after round. They back it all with a lifetime warranty, which is hard to argue with.
Key Specifications
- Manufacturer: Leapers UTG
- MPN: AQR422
- UPC: 4717385557055
- Ring Inner Diameter: 34mm
- Height Profile: X-High
- Mount Type: Picatinny
- Center Height: 1.54 in (39mm)
- Saddle Height: 0.87 in (22mm)
- Ring Width: 0.87 in (22mm)
- Max Objective Bell Diameter: Up to 78mm
- Material: 6061-T6 Aluminum
- Finish: Matte Black Anodized
- Quick-Detachable: Yes
- Number of Pieces: 2 (pair)
- Weight: 5.0 oz (142g)
- Top Screw Torque Spec: 25 in-lbs (T20)
- Rail Space Required: 3 slots per ring
- Caliber Rating: .338 Lapua Magnum
- Warranty: Leapers Lifetime Warranty
What’s Included
- 2 ACCU-SYNC QR X-High scope rings (one pair)
- M4 Socket Head T15 Torx Head Screws
- T15 Torx Wrench
- 3mm Allen Wrench
- User Manual
Frequently Asked Questions
What size optic will the ACCU-SYNC QR X-High rings fit?
These rings are made for 34mm tube optics only. With the X-High profile you get a 39mm center height and clearance for objective bells up to about 78mm, so they handle most large precision and long-range scopes with room to spare over a bulky handguard.
Do these rings really hold zero after you remove and reinstall the scope?
Yes. The locking quick-release levers paired with squared recoil stops are designed to lock the rings into the rail the same way every time, so your zero comes back when you reinstall. Folks running these consistently report a reliable return to zero after pulling the optic off and putting it back on.
What torque should I use on the ACCU-SYNC rings?
UTG recommends 25 inch-pounds on the ring top screws, and those take a T20 driver. The quick-release clamp that attaches to the rail is tool-free, so you adjust that tension by hand with no wrench needed. A torque driver is worth using on the top caps to avoid over-tightening on your scope tube.
Will these fit my Picatinny rail?
They clamp onto standard Picatinny rails and each ring eats up three slots, so you'll want to check that you have enough rail length and room to space them for proper eye relief. They do not require lapping out of the box.



Reviews
There are no reviews yet.