Description
The AK's factory rear sight is a lot of things, but precise and red dot friendly isn't on the list. The Samson RSR2 fixes that by replacing the stock rear sight with a steel rail cut to the Aimpoint Micro T1 footprint, so you can bolt a modern micro red dot right where it belongs. It's the updated take on Samson's popular rear sight rail, developed alongside East Coast AK specialist Ken Allen, and it carries the same low-and-tight philosophy that made the original a favorite.
Why the RSR2 Sits So Low
This is a direct mount, meaning the optic threads straight to the rail with no riser or secondary base stacking up height. At roughly a half inch tall and five inches long, it keeps the dot hugging the receiver for a natural cheek weld and a sight picture that doesn't feel perched up in the air. Built entirely from steel with a mag phosphate finish, the RSR2 shrugs off recoil and the general abuse an AK tends to dish out.
Optic Compatibility on the RSR2
Any red dot built to the Aimpoint Micro mounting standard drops right on. That covers the Aimpoint Micro T1 and T2, Comp M5, and H1/H2, plus a long list of others sharing the footprint like the Holosun 403, 503, and 515, Sig Romeo 4 and 5, Vortex Sparc and Crossfire, Burris FastFire RD, and Swampfox Liberator. The optic itself is sold separately, so you can run whatever micro dot you already trust.
Backup Sight Built In
Samson didn't just delete your iron sights. The RSR2 includes an integrated rear sight notch, so if your red dot ever dies or you simply want backup irons, you can still line up the front post and stay in the fight. It's a smart detail that makes committing to a red dot a lot easier to swallow.
Key Specifications
- Model: RSR2
- Manufacturer: Samson Manufacturing
- Manufacturer Part Number: 03-00300-03
- UPC: 850028390474
- Platform: AK-47 / AK-74
- Optic Footprint: Aimpoint Micro T1
- Mount Type: Direct mount to rear sight block
- Style: Low profile
- Material: Steel
- Finish: Mag phosphate, black
- Length: 5 in
- Width: 1 in
- Height: 0.5 in
- Weight: 0.23 oz
- Pieces: 2
- Backup Sight: Integrated rear sight notch
What’s Included
- Samson RSR2 rear sight rail (2-piece)
- Mounting hardware
Frequently Asked Questions
What optics fit the Samson RSR2?
The RSR2 is cut to the Aimpoint Micro T1 footprint, so anything built to that standard mounts directly. That includes the Aimpoint Micro T1 and T2, Comp M5, and H1/H2, along with popular dots like the Holosun 403, 503, and 515, Sig Romeo 4 and 5, Vortex Sparc and Crossfire, Burris FastFire RD, and Swampfox Liberator. The optic is not included.
Does the RSR2 replace my AK's rear sight?
Yes. The RSR2 swaps out the standard AK rear sight and mounts to the rear sight block in its place. Samson built an integrated sight notch into the rail, so you keep a usable backup rear sight even after the swap.
How low does the RSR2 mount the red dot?
About as low as it gets for an AK. This is a direct mount with no riser, sitting roughly a half inch tall, which keeps the optic tucked close to the receiver for a comfortable cheek weld and a lower-third or similar sight picture depending on your optic.
Is the Samson RSR2 durable enough for hard use?
It's machined from steel with a mag phosphate finish, so it's built to handle AK recoil and rough handling without flexing or wearing out. The two-piece design clamps securely to the sight block for a stable, repeatable platform.




Reviews
There are no reviews yet.