$135.52
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
This is the seater precision handloaders reach for when they want their 6mm Dasher rounds built right. Instead of the common threaded press die, L.E. Wilson uses a chamber-type design that fully captures the case and bullet before the bullet is pushed straight into the neck by a close-fitting stem. The case sits stationary and the bullet comes down to meet it, which is a big reason these dies have earned such a strong reputation for minimal runout. This particular model ships with the VLD stem rather than the standard one, so it's set up for the longer secant and hybrid bullets that dominate the Dasher game.
VLD and hybrid bullets have a steeper ogive than traditional bullet shapes, and a standard seating stem tends to grip too high and sometimes leave a ring or pinch the bullet. The VLD drift is reamed at a steeper internal angle so it contacts the bullet lower on the ogive. That keeps the bullet aligned with the neck and gives you more consistent seating depth without marring the tip. If you're loading Bergers, SMKs, or similar high-BC projectiles for your Dasher, this is the stem you want in the cap.
The micrometer adjustment is the heart of this tool. It reads in .001 graduations with a clear laser-engraved scale, so you can make fine, repeatable depth changes and come right back to a setting later. Larger jumps are handled through the 3/8-24 TPI threads in the cap. Because the whole die is compact and press-free in operation, plenty of reloaders toss it in the range bag and chase the lands right at the bench, tuning seating depth against their own chamber instead of guessing at home.
The body is machined from stainless steel and made in the USA to tight tolerances. It's designed to run on an arbor press, which is where the feel really comes through, letting you sense each bullet seat and cull any that feel off. It can also be worked with a soft-faced mallet in a pinch, though an arbor press is the way to get the most out of it.
Yes. This model (S6M-DASVLD) ships with the VLD drift stem rather than the standard stem. That means it's ready out of the box for secant and hybrid bullets, so you don't have to order the VLD stem separately like you would with the standard seater.
An arbor press is the recommended way to run it and gives you the best feel for each bullet seating. You can also seat bullets with a soft-faced mallet in a pinch, but most precision reloaders pair it with a small arbor press for the cleanest, most repeatable results.
It can, and plenty of reloaders run it that way. The VLD stem is designed to contact the bullet lower on the ogive for VLD, secant, and hybrid shapes, but it also handles tangent ogive bullets fine. If you load a mix of bullet styles for your Dasher, it's a versatile choice.
The micrometer top reads in .001 increments with a laser-engraved scale, so you can make precise, repeatable COAL changes and return to a known setting. For larger adjustments, you back the cap off using the 3/8-24 TPI threads. This combination makes it easy to tune seating depth at the bench or at the range.
| UPC | 850067827726 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | S6M-DASVLD |
| Shipping Weight | 0.838 |
You must be logged in to post a review.
Reviews
There are no reviews yet.