Description
If you run a Wilson case trimmer, the case holder is what turns it from good to great, and this one is cut for the Creedmoor family of brass. It cradles your 22, 6mm, and 6.5 Creedmoor cases by the body taper rather than the case head, which is exactly how a round sits in a rifle chamber. That design keeps the case perfectly aligned to the cutter face, so your trim lengths stay uniform from the first piece of brass to the last.
How the New Case Holder Earns Its Keep
This is the NEW CASE version, which means it's sized for fresh factory brass and full length resized cases. Wilson makes a separate fired-case holder for necked-sized brass that has swelled after firing, so if you're trimming brass that's only been neck sized, that larger-diameter holder is the one you'd reach for. Matching the holder to the brass is what keeps the case mouth and head sitting where they should during the cut. Using it is straightforward: drop the case in, tap the head on the bench to seat it on the taper, set it in the trimmer against the depth stop, and crank. A quick rap on the case mouth pops it right back out.
More Than Just Trimming With This Case Holder
Trimming is the headline job, but this holder pulls double duty. Paired with Wilson's Uniform Deburring tool, it also handles primer pocket reaming, neck reaming, and deburring, all with the same square, repeatable hold. That makes it a handy anchor point for several steps in your brass prep routine.
Machined from steel and made in the USA, these holders are built to shrug off years of bench time. Wilson's reputation among precision handloaders is well earned, and this piece is a big part of why their trimming system has such a loyal following. If accuracy and consistency matter to your loads, this is the right holder for your Creedmoor brass.
Key Specifications
- Manufacturer: L.E. Wilson
- Manufacturer Part Number: NCH-65CRE
- UPC: 815145028273
- Cartridge Family: 22 Creedmoor / 6mm Creedmoor / 6.5 Creedmoor
- Case Type: New Case (new and full length resized brass)
- Material: Steel
- Compatibility: L.E. Wilson Case Trimmer
- Country of Origin: United States
- Shipping Weight: 0.3 lbs
What’s Included
- L.E. Wilson New Case Holder for 22/6mm/6.5 Creedmoor (NCH-65CRE)
Frequently Asked Questions
What's the difference between the New Case holder and a fired case holder?
This NEW CASE holder is sized for fresh factory brass and cases that have been full length resized. Brass that has only been neck sized swells slightly after firing and may need the larger fired-case holder instead. Matching the holder to your brass keeps the case mouth protruding far enough to trim cleanly.
Will this Wilson case holder fit my trimmer?
Yes, it's designed to work with the L.E. Wilson Case Trimmer, dropping into the trimmer base and keeping the case aligned along its axis for square cuts. The holder is sold separately from the trimmer itself. If you run a Wilson trimmer, this is the correct style of holder for the job.
Does this case holder cover all three Creedmoor calibers?
It's cut for the Creedmoor family, so it handles 22 Creedmoor, 6mm Creedmoor, and 6.5 Creedmoor brass. Because Wilson holders size by case body taper and length rather than bullet diameter, these cartridges share the same holder. That makes it a versatile pickup if you load more than one of them.
Can I use this holder for anything besides trimming?
You can. Alongside trimming to length, it also supports your brass for primer pocket reaming, neck reaming, and deburring when paired with L.E. Wilson's Uniform Deburring tool. That tool is sold separately, but the holder gives you the same square, repeatable hold across each of those prep steps.



Reviews
There are no reviews yet.