Description
The 6mm Dasher has earned its reputation as the cartridge to beat in precision rifle, and getting the most out of it comes down to good brass prep and consistent sizing. That's exactly what the Area 419 ZERO S-Series 6mm Dasher Sizing Die is built to deliver. Area 419 took the features that made their high-end M-Series so popular and worked them into a standard 7/8" threaded die body, so it drops right into a conventional single-stage press without any special hardware.
The Dasher is a wildcat with no SAAMI spec, which means every piece of ammo you run through a rifle chambered for it is handloaded. That puts a lot of weight on your dies. This one is reamer cut to exacting dimensions for a true size, which is Area 419's way of saying it won't leave you fighting a sticky bolt after the second firing. The design also sizes full-length from the neck all the way to the extractor groove, so your brass stays consistent in the chamber shot after shot.
What Sets the ZERO S-Series Dasher Die Apart
This die ships with a precision-ground expander mandrel set for .002" neck tension, and if you want to fine-tune that number you can add increments with the Area 419 mandrel kit. It also features spring ejection for spent primers, replaceable steel decap pins, and a hydraulic shoulder pressure relief system that keeps shoulder bump smooth and repeatable. Everything is machined and assembled in the USA.
Shellholder Compatibility for the 6mm Dasher Die
Keep in mind this is a die-only package, so no shellholder is included in the box. The good news is it works with common shellholders from Redding, Hornady, RCBS, and the like, and it's also compatible with the Area 419 ZERO Modular Shellholder System if you've already bought into that setup. Whether you're loading for PRS, benchrest, or just chasing tight groups off the bench, this die gives you the consistent case dimensions that make the Dasher so forgiving to load for.
Key Specifications
- Manufacturer: Area 419
- Manufacturer Part Number: 419-ZERODIE-S6DA
- UPC: 810080183100
- Series: ZERO S-Series
- Cartridge: 6mm Dasher
- Die Type: Full-Length Sizing Die
- Thread: Standard 7/8" x 14
- Neck Tension Mandrel: .002" included
- Decap Pins: Replaceable steel
- Shoulder Control: Hydraulic shoulder pressure relief
- Shellholder Compatibility: Redding, Hornady, RCBS, and ZERO Modular Shellholder System
- Country of Origin: Made in USA
What’s Included
- Area 419 ZERO S-Series 6mm Dasher sizing die
- Area 419 ZERO Universal Die Ring
- .002" neck tension expander mandrel
- Spare decapping pin
- Necessary install/removal tools
Frequently Asked Questions
Does the ZERO S-Series 6mm Dasher die come with a shellholder?
No, this is a die-only package and does not include a shellholder. It is compatible with common shellholders from Redding, Hornady, RCBS, and similar brands. It also works with the Area 419 ZERO Modular Shellholder System if you run that setup.
Will this die fit a standard reloading press?
Yes. Area 419 built the ZERO S-Series into a traditional 7/8" threaded die body, so it threads right into any conventional single-stage press. No proprietary press or special adapters are needed to run it.
What neck tension does the 6mm Dasher die provide?
Each die ships with a precision-ground expander mandrel set for .002" neck tension. If you want to dial in a different amount of tension, you can add more increments with the Area 419 mandrel kit, which is sold separately.
Why do I need a quality sizing die for the 6mm Dasher?
The 6mm Dasher is a wildcat with no SAAMI specification, which means every round is handloaded and your dies carry a lot of responsibility for consistency. This die is reamer cut to exact dimensions for a true size, which helps avoid a sticky bolt after fire-forming. Consistent case sizing is a big part of why the Dasher shoots so well in PRS and benchrest.




Reviews
There are no reviews yet.