Description
The Savage/Stevens 301 in .410 has become a favorite little turkey gun, but the factory choke leaves a lot on the table. Swap in the JEBS Headhunter XX-Full and you get the kind of tight, wad-separating pattern that makes the .410 a legitimate gobbler-getter out to distances most folks wouldn't expect from a bore this small. It's fitted specifically for the Savage/Stevens 301 barrel, so it threads in and sits flush with a no-slip fit.
What Sets the Headhunter Apart
JEBS builds every choke from premium 17-4 stainless steel, heat treated to roughly 44 Rockwell hardness. That matters when you're running dense, hard tungsten super shot or steel through it, since those payloads can chew up softer tubes over time. The heart of the design is JEBS' patented multi-staged interior bore, which improves shot and wad cup separation so your pellets stay together longer and hit the target in a denser, more precise cloud.
Dialing In Your 410 Turkey Setup
This is the XX-Full constriction, the tightest offering in the .410 lineup, and it's meant for one job: putting as many pellets as possible into a turkey's head and neck at range. Paired with quality TSS in #9 or #10, the 301 with a Headhunter can throw eye-popping counts inside a 10-inch circle at 40 yards. It also incorporates the JEBS Impact-Drum system, which uses a small wad and a hammer spring crimp notch to keep the choke from denting the firing pin on single-shot guns like the 301. Little details like that tell you it was designed with this exact platform in mind.
The matte finish keeps glare down in the turkey woods, and the whole thing is proudly made in the USA. If you've been running the stock tube and wondering why your patterns look thin, this is the upgrade that changes the conversation.
Key Specifications
- Manufacturer: JEBS Choke Tubes
- Manufacturer Part Number: JPC-410S1/XXF
- UPC: 640970860121
- Gauge/Bore: .410 bore
- Fit: Savage/Stevens 301
- Constriction: XX-Full
- Finish: Matte
- Material: 17-4 Stainless Steel
- Hardness: Approx. 44 Rockwell
- Design: Patented multi-staged interior bore
- System: JEBS Impact-Drum
- Intended Use: Turkey hunting
- Country of Origin: USA
What’s Included
- JEBS Headhunter .410 Savage/Stevens 301 XX-Full choke tube
Frequently Asked Questions
Will this JEBS Headhunter choke fit my Savage/Stevens 301 .410?
Yes, this tube is cut specifically for the Savage/Stevens 301 choke thread pattern in .410 bore. It threads right into the 301 barrel and fits flush. If your gun uses a different thread system, you'll want the version matched to that platform instead.
What loads work best with the XX-Full Headhunter?
It's built for turkey duty and really shines with dense tungsten super shot in #9 or #10, which is where the small .410 bore gains its punch. The 17-4 stainless construction is tough enough to handle TSS and steel without wearing out. Always pattern your specific ammo before hunting to confirm your point of impact.
How is the Headhunter different from the factory 301 choke?
The factory tube is a general-purpose choke, while the Headhunter uses JEBS' patented multi-staged interior bore to tighten and densify the pattern for turkey range. Hunters running this swap consistently report far denser pattern counts and more confidence at 40-plus yards compared to the stock choke.
What does the JEBS Impact-Drum system do on a single shot?
The Impact-Drum design uses a small wad and a hammer spring crimp notch built into the choke to protect the firing pin on single-shot guns like the 301. It helps prevent denting and keeps the action running smoothly over the long haul.




Reviews
There are no reviews yet.