0
0

Forster Ultra Micrometer Seater Die 6mm PPC | U00040

UPC: 757253006425

$78.99

Out of stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster Ultra Micrometer Seater Die for 6mm PPC takes the guesswork out of seating depth. It's a non-crimping seater built around a floating chamber sleeve that captures the full length of the case before the bullet ever starts moving, keeping the case, bullet, and seating stem on one common axis. The payoff is match-grade alignment and the kind of low runout that shows up on target. This is the exact cartridge Forster pioneered their sliding-sleeve design for, so the 6mm PPC fit is dialed in.

What Sets the Ultra Micrometer Apart from the Standard Bench Rest Seater

This die carries every straight-line feature of Forster's original Bench Rest Seater, then adds the ultra-accurate micrometer head on top. You can fine-tune in either direction down to .0005", with crisp white index marks at .001" increments that are easy to read and record. Each full turn of the micrometer moves the stem .025", so you can creep right up to the lands without a pile of trial-and-error dummy rounds. Seat a bullet close, measure it, then dial the micrometer to the exact length you want.

Why the 6mm PPC Crowd Reaches for This Seater

6mm PPC is a benchrest cartridge where tiny details decide groups, and this die was made for that world. The micrometer top is a real time-saver if you run different bullet weights or profiles. Record your settings in a load log, and switching from a light pill to a heavier one is just a twist back to a noted number. Reloaders consistently report runout under .003" and praise the smooth, repeatable adjustment that stays put once set.

Built to Forster's Bench Rest Standard

The die is machined from quality steel to tight tolerances and hand-polished before and after heat treatment for a fine finish. It threads into any standard 7/8"-14 press and uses Forster's Cross Bolt lock ring, which clamps the split ring rather than digging a screw into the die threads. Made in the U.S.A., it's a tool that earns its spot on the bench for the long haul.

Key Specifications

  • Cartridge: 6mm PPC
  • Die Type: Ultra Micrometer Bullet Seater
  • Crimp: Non-crimping
  • Adjustment: Micrometer, fine-tunes to .0005"
  • Index Marks: .001" increments, .025" per full revolution
  • Alignment: Floating/sliding chamber sleeve
  • Lock Ring: Forster Cross Bolt split lock ring
  • Press Thread: Standard 7/8"-14
  • Material: Steel
  • Country of Origin: Made in U.S.A.
  • Manufacturer: Forster Products
  • Manufacturer Part Number: U00040
  • UPC: 757253006425
  • Shipping Weight: 0.8 lb

What’s Included

  • One Forster Bench Rest Ultra Micrometer Seater Die
  • One Forster split-type Cross Bolt lock ring
  • Storage case
  • Complete instructions

Frequently Asked Questions

Does the Forster Ultra Micrometer Seater Die for 6mm PPC crimp the case?

No, this is a non-crimping seater die. It holds the bullet and case in alignment and press-fits the bullet without applying a crimp. If you need a crimp, you'd handle that separately.

How fine can I adjust the seating depth?

The micrometer head adjusts in either direction and is easily set to .0005". Index marks are laid out at .001" increments, and one full turn of the micrometer moves the stem .025", making it simple to creep up on the lands and record exact settings.

Will this die fit a standard reloading press?

Yes. It uses the standard 7/8"-14 thread, so it threads into any common single-stage or turret press. It also comes with Forster's Cross Bolt lock ring, which clamps the split ring instead of running a set screw into the die body.

How does the Ultra Micrometer compare to the standard Forster Bench Rest Seater?

Both share the same straight-line seating design with the sliding chamber sleeve that aligns the case for low runout. The Ultra adds a micrometer head on top for precise, repeatable depth changes you can dial by the numbers. It's the better pick if you swap bullet weights or do a lot of seating-depth load testing.

Additional information

UPC

757253006425

Manufacturer

Manufacturer Part Number

U00040

Shipping Weight

0.8

Reviews

There are no reviews yet.

Be the first to review “Forster Ultra Micrometer Seater Die 6mm PPC | U00040”