0
0

Peterson Cartridge 308 Win SRP Unprimed Match Brass – 50 ct

UPC: 859449006049

$58.99

7 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Peterson built its reputation on making some of the cleanest, most uniform rifle brass you can buy, and this 308 Winchester case carries that reputation in a small rifle primer configuration. It ships unprimed, so you have full control over primer selection, powder charge, and seating depth from the first case to the last. If you've been running large primer 308 brass and want to step up your precision game, this is where a lot of handloaders make the jump.

Why Peterson 308 SRP Brass Earns Its Keep

The small rifle primer pocket is the headline here. Competitive handloaders tend to favor SRP cases because the extra material in the case head gives the primer pocket longer life, holding tight through more firing cycles before it ever loosens up. Peterson ran its own longevity testing at max pressure and found the pockets held up impressively over repeated firings with no cracks or head separation, which tells you a lot about how this brass is going to behave over a full reloading life. For folks loading toward the upper end, the smaller pocket and tighter flash hole can also help with more consistent ignition.

Loading Notes for the 308 Win SRP Case

There's one detail worth knowing before you set up your dies. These SRP cases use a smaller flash hole, measuring 0.060 inches versus the 0.080 inches found on large primer brass, so you'll want an undersized or extra-small decapping pin to deprime without bending a standard pin. Beyond that, treat it like any premium case: a light trim to uniform length, a chamfer and deburr, and you're ready to prime and load.

Match-Grade Consistency You Can Measure

Every case runs through Peterson's multi-step manufacturing and inspection process, and the payoff shows up on paper. The brass is known for consistent weight and dimensions case to case, which is exactly what you're after when you're trying to shrink group sizes and tighten velocity spreads. Whether you're building loads for a precision bolt gun, a gas gun, or wildcat work off the 308 parent case, this gives you a dependable, repeatable foundation. Made in the USA by a family-owned shop that builds brass for people who actually shoot it.

Key Specifications

  • Caliber: .308 Winchester SRP
  • Primer Pocket: Small Rifle Primer
  • Condition: New, Unprimed
  • Flash Hole Diameter: 0.060 in
  • Grade: Match-Grade
  • Material: Brass
  • Quantity: 50 cases
  • Manufacturer: Peterson Cartridge
  • Manufacturer Part Number: 40018-R
  • UPC: 859449006049
  • Country of Origin: USA

What’s Included

  • 50 Peterson 308 Winchester SRP unprimed brass cases
  • Hinged plastic ammo storage box

Frequently Asked Questions

Does the Peterson 308 Win SRP brass come primed or unprimed?

It ships unprimed, giving you full control over primer choice and your load recipe. You'll install a small rifle primer of your choosing before charging and seating. This is new brass, not once-fired, so it's ready for standard case prep out of the box.

Why would I choose small rifle primer 308 brass over standard large primer?

Many precision and competition handloaders prefer the SRP case because the added material in the case head gives the primer pocket a longer usable life. The smaller pocket and flash hole can also help with more consistent ignition, which matters when you're chasing low velocity spreads. If you reload the same cases many times, that extra pocket longevity is a real advantage.

Do I need special tools to deprime the Peterson 308 SRP cases?

Yes, these SRP cases use a smaller 0.060 inch flash hole compared to the 0.080 inch hole on large primer brass. Because of that, you'll want an undersized or extra-small decapping pin so you don't bend a standard-sized pin during depriming. It's a quick, inexpensive swap and most die makers offer the smaller pin.

Is this Peterson 308 brass good for competition and precision loads?

It's built specifically for that purpose. Peterson is a family-owned American maker focused on match-grade brass with tight weight and dimensional consistency case to case. That uniformity is exactly what helps shrink groups and tighten velocity numbers during load development.

Additional information

UPC

859449006049

Manufacturer

Manufacturer Part Number

40018-R

Caliber/Gauge

.308 Winchester SRP

Length

5.7500

Quantity

50

Shipping Weight

1.65

Reviews

There are no reviews yet.

Be the first to review “Peterson Cartridge 308 Win SRP Unprimed Match Brass – 50 ct”