$38.72
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The 6mm PPC is a benchrest darling, and brass prep is where the accuracy game is won or lost. This L.E. Wilson Case Gage gives you a quick, repeatable way to check your brass without guesswork. It's a one-piece polished steel cylinder machined to 6mm PPC dimensions, and it reads both overall case length and headspace off fired cases. Drop a case in, lay a straight edge or caliper across the top, and you can see exactly where you stand against min and max specs.
The real value here is dialing in your full-length sizing die. Oversizing bottleneck brass is one of the most common reloading mistakes, and it quietly shortens case life while hurting consistency. By measuring a fired case, the gage shows you how far you're bumping the shoulder back so you can set your die to move brass the minimum amount needed. It also flags when cases have grown long enough to need trimming to the datum line.
Use it with fired cases as your baseline. You run a case through, note where it sits, then adjust your sizing and trimming from there. Paired with a good caliper or depth micrometer, it becomes a fast reference check between loading sessions. One thing worth noting up front: this gage checks length and headspace only, not body diameters, so it's a dimensional reference rather than a full inspection tool.
L.E. Wilson has been building this style of case gage since 1935, when founder Sam Wilson came up with it to solve a buddy's case-separation problem. That same straightforward design is still earning its spot on reloading benches today, and it's a staple for anyone chasing tight groups out of a 6mm PPC. If you load for this cartridge, it's one of those tools you'll reach for every single session.
It checks overall case length and headspace on fired 6mm PPC brass. You drop a case in and use a caliper or straight edge across the top to read where it falls between minimum and maximum specs. It does not measure body diameters, so think of it as a length and headspace reference.
This gage is designed to be used with fired cases. Measuring a fired case gives you a baseline so you can set up your full-length sizing die to bump the shoulder back the minimum amount. That's the whole point, since it helps you avoid oversizing and extends the life of your brass.
Yes, a caliper or depth micrometer makes it far more precise. The gage has milled reference surfaces, and you measure the difference between the case head or shoulder and the gage to determine headspace and length. A straight edge works for a quick visual check, but a caliper gives you real numbers to adjust your die.
No, this is the one-piece non-adjustable style machined specifically for 6mm PPC. The adjustable Wilson gages are a separate product made for belted magnum cases. For a rimless cartridge like the 6mm PPC, this fixed one-piece gage is exactly what you want.
| UPC | 857949005845 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | CG-6PPC |
| Shipping Weight | 0.31 |
You must be logged in to post a review.
Reviews
There are no reviews yet.