Description
This is the 6.5mm head for the Area 419 funnel system, one piece of a modular setup built to replace the one-size-fits-all plastic funnel that's been collecting dust on most reloading benches. Instead of a single generic hole, Area 419 built a lineup of caliber-matched heads that thread onto the funnel body, and this one is cut specifically for 6.5mm/.264 cartridges. It carries a 0.297" neck ID and comes anodized green so you can spot it fast on the bench or in the storage block.
What Sets the 6.5mm Area 419 Funnel Head Apart
The head is machined from solid 6061-T6 aluminum, which means no static charge to cling powder kernels to the walls and a smooth, consistent drop every time. It sits slightly larger than the neck diameter and holds solid on the case rather than fitting over the body, so it stays put while you pour. The bore runs a few thousandths under bullet diameter to keep flow quick without overflow, and the smooth interior surfaces help powder slide right through.
Smart Details on the 419-FN-HEAD-6.5
Those flutes on the outside look sharp, but inside they do real work by disrupting kernels that would otherwise try to bridge up at the neck. There's also a 3/8" tall straight section at the top that keeps powder from bouncing back out when you pour it in. The interface where the head threads to the funnel body is designed so kernels can't get trapped between the two, as long as you snug it down all the way.
Fitting the 6.5mm Head Into Your Area 419 Setup
Keep in mind this listing is for the head only, so you'll need an Area 419 funnel body to run it. If you load 6.5 Creedmoor, 6.5 PRC, 6.5×47, or any other .264 cartridge, this is the head that matches. It's made in the USA from American aluminum on a HAAS mill, and it plays right into the color-coded system so your calibers never get mixed up.
Key Specifications
- Manufacturer: Area 419
- Manufacturer Part Number (MPN): 419-FN-HEAD-6.5
- UPC: 853675008624
- Caliber: 6.5mm / .264
- Neck ID / Size: 0.297"
- Material: 6061-T6 Billet Aluminum
- Color: Green (anodized)
- Straight Section: 3/8" tall at top to reduce powder bounce-out
- Mounting: Threads onto Area 419 funnel body
- Origin: Made in USA
What’s Included
- (1) Area 419 6.5mm caliber-specific funnel head (head only, no funnel body or storage block)
Frequently Asked Questions
Does the 6.5mm Area 419 funnel head come with the funnel body?
No, this listing is for the caliber-specific head only. You'll need an Area 419 funnel body for it to thread onto. If you don't own the base funnel yet, look at the funnel body or the Master Kit, which bundles several heads together.
What cartridges does the 419-FN-HEAD-6.5 work with?
This head is cut for 6.5mm/.264 caliber cases, so it covers popular rounds like 6.5 Creedmoor, 6.5 PRC, 6.5×47 Lapua, and other .264 cartridges. It's sized to sit on the case neck rather than over the body, giving you a stable fit while you pour.
Why is an aluminum funnel head better than a standard plastic funnel?
Being machined from solid 6061-T6 aluminum means there's no static charge pulling powder kernels to the walls, so you get cleaner, more consistent drops. The caliber-specific bore and internal flutes also keep kernels from bridging up at the neck, which a universal plastic funnel can't do.
How does the head stay in place on the case?
Instead of fitting over the body of the case, this head is sized slightly larger than the neck diameter so it holds solid right on the neck. That keeps the funnel from tipping and spilling powder while you work.



Reviews
There are no reviews yet.