Description
The RCBS MatchMaster Duo Die Set brings together two of the most requested dies in the RCBS lineup into one package built for 30-06 Springfield. You get the premium MatchMaster seating die paired with a standard full-length sizing die, which means you can size your brass back to proper dimensions and seat bullets with real precision using the same set. RCBS introduced the Duo series to give reloaders that micrometer seating control without the extra steps that come with bushing dies, and it covers everything from 22 ARC up to 338 Lapua.
What Sets the MatchMaster Duo Seating Die Apart
The seating die is where this set earns its keep. It uses a free-floating, self-centering stem along with RCBS's bullet seating window and retention system, so instead of balancing a bullet on the case mouth you just drop it through the window and run the ram. The internal sleeve catches the bullet and holds it in alignment with the case for concentric results. The oversized micrometer on top adjusts in .001 inch increments with large, easy-to-read markings, making it simple to dial in a seating depth and come right back to it later.
Full-Length Sizing Without the Bushings
The full-length sizing die resizes the whole case for reliable feeding, extraction, and chamber fit, which is exactly what you want for a semi-auto or a hunting rifle where the brass needs to chamber every time. Unlike the standard MatchMaster sets that run bushing sizers, the Duo uses a non-bushing full-length die, so there's nothing extra to buy or swap. Both dies use the standard 7/8-14 thread and drop into any common single-stage or turret press.
Built to Last and Made in the USA
RCBS builds these from case-hardened steel and backs the set with their Limited Lifetime Warranty. The MatchMaster Duo is proudly made in the USA, and it's a strong pick for load development, long-range work, or precision hunting loads in the venerable 30-06.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 14804
- UPC: 850079710177
- Caliber: 30-06 Springfield
- Die Set Type: MatchMaster Seating Die + Full-Length Sizing Die
- Number of Dies: 2
- Seating Adjustment: Micrometer, .001 inch increments
- Bushings: None required (non-bushing full-length sizer)
- Thread Size: 7/8-14
- Material: Case-hardened steel
- Shellholder: No. 3
- Warranty: Limited Lifetime
- Country of Origin: USA
- Shipping Weight: 0.63 lbs
What’s Included
- RCBS MatchMaster micrometer-adjustable seating die
- RCBS full-length sizing die
Frequently Asked Questions
Does the MatchMaster Duo Die Set use bushings?
No, the Duo set skips bushings entirely. It pairs the micrometer MatchMaster seating die with a standard non-bushing full-length sizing die, so there's nothing extra to buy and it's ready to load right out of the box. That's the main difference between the Duo and the standard MatchMaster sets, which run bushing sizers.
Is a shellholder included with this die set?
No, a shellholder is not included. For 30-06 Springfield you'll want the RCBS No. 3 shellholder, which is the same one used across common cartridges like the 30-06, 308, and 25-06. If you already reload any of those you likely have it on hand.
What makes the MatchMaster seating die more precise?
The seating die uses a free-floating, self-centering stem along with a bullet seating window and retention system. You drop the bullet through the window and the internal sleeve catches and aligns it with the case for concentric seating. The oversized micrometer adjusts in .001 inch increments so you can return to a given seating depth exactly.
Will these dies fit my press?
Yes, both dies use the standard 7/8-14 thread, so they'll thread into just about any common single-stage or turret reloading press. There's no proprietary press or special setup required to run the MatchMaster Duo.




Reviews
There are no reviews yet.