0
0

RCBS Matchmaster Seater Die 6.8mm Western – Micrometer Bullet Seating

UPC: 850070830577

$121.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading 6.8 Western and chasing tighter groups, the seating die is where a lot of your consistency gets made or lost. RCBS built the Matchmaster line to pull the best traits from their Gold Medal and Competition dies into one tool, and the 6.8 Western version brings that same bench-grade feel to one of the flatter-shooting hunting cartridges around. It's a stand-alone seating die, so it drops right into your existing press and works alongside whatever sizing setup you already run.

The build quality shows the moment you handle it. Each die is machined from case-hardened steel with interior surfaces that are precision-drilled, reamed, and hand-polished, then finished in a deep blue that looks like it belongs on a good rifle. The micrometer knob is oversized with large numbers and hash marks, so reading and turning it is easy even in less-than-perfect light. Dial in one thousandth of an inch and that's what you get at the case, which makes load development and repeat batches a lot less fussy.

What Sets the Matchmaster Seater Die Apart

The feature reloaders talk about most is the bullet seating window. Instead of balancing a projectile on the case mouth and hoping it stays put, you drop the bullet in through the side port and run the press. An internal sleeve catches the bullet, holds it in alignment with the case, and guides the two together through the entire stroke. That's how the Matchmaster produces the concentric ammo it's known for, and it keeps your fingers out of the way while you're at it.

Fitting the 6.8 Western Die Into Your Setup

The die uses the standard 7/8"-14 thread, so it threads into any common single-stage or turret press without adapters. The free-floating, self-centering seating stem lets the bullet find its own alignment rather than forcing it, which helps with runout on longer, high-BC bullets that 6.8 Western shooters tend to favor. It's made in the USA in Oroville, California, and backed by the RCBS Limited Lifetime Warranty.

Key Specifications

  • Manufacturer: RCBS
  • Cartridge: 6.8mm Western
  • Die Type: Bullet Seating Die
  • Adjustment: Oversized Micrometer, .001" increments
  • Seating Stem: Free-floating, self-centering
  • Loading Feature: Bullet seating window with retention system
  • Thread: Standard 7/8"-14
  • Material: Case-hardened steel
  • Finish: Deep blued
  • Origin: Made in USA (Oroville, CA)
  • Warranty: RCBS Limited Lifetime Warranty
  • Manufacturer Part Number: 28240
  • UPC: 850070830577
  • Shipping Weight: 0.9 lbs

What’s Included

  • RCBS Matchmaster bullet seating die (6.8mm Western)
  • Die storage box

Frequently Asked Questions

Does the Matchmaster Seater Die come with a sizing die?

No, this is a stand-alone bullet seating die only. It covers the seating step and pairs with whatever 6.8 Western sizing die you already own or buy separately. If you want a matched pair, RCBS also offers Matchmaster Duo and full-length die sets for some cartridges.

Will this die fit my press?

Yes, it uses the standard 7/8"-14 thread, so it threads into virtually any single-stage or turret reloading press without adapters. That's the same thread pattern used across most RCBS, Hornady, Lee, and Redding dies.

How precise is the micrometer adjustment on the Matchmaster seater die?

The oversized micrometer knob adjusts seating depth in .001-inch increments with large, easy-to-read numbers and hash marks. Dial in a thousandth and that's what you get at the case mouth, which makes dialing in your load and repeating batches straightforward.

What makes this die better than a standard seating die for 6.8 Western?

The internal sleeve catches the bullet and aligns it with the case before and during seating, which produces notably concentric ammunition. The side loading window also lets you drop the bullet in rather than balancing it on the case mouth. Those two features are the main reasons reloaders reach for the Matchmaster over a basic seater.

Additional information

UPC

850070830577

Manufacturer

Manufacturer Part Number

28240

Shipping Weight

0.9

Reviews

There are no reviews yet.

Be the first to review “RCBS Matchmaster Seater Die 6.8mm Western – Micrometer Bullet Seating”