Description
The RCBS MatchMaster Bullet Seating Die for .28 Nosler sits at the top of the RCBS die lineup, and it shows the moment you pick it up. This is a stand-alone seating die built for handloaders who want to squeeze every bit of consistency out of a fast, flat-shooting magnum like the .28 Nosler. The body is machined from case-hardened steel, with internal surfaces precision-drilled, reamed, and hand-polished, then wrapped up in a deep blued finish that looks right at home next to a nice rifle.
What Sets the MatchMaster Seater Die Apart
The star of the show is the oversized micrometer adjustment knob. It's marked with bold, easy-to-read letters and hash marks, and it adjusts seating depth in one-thousandth-of-an-inch increments. Dial in a number and that's exactly what you get, which makes repeating a load or fine-tuning for a new bullet a breeze. Setting your cartridge overall length is fast and consistent, so your loads come off the press the same every single time.
Dropping Bullets Into the .28 Nosler MatchMaster Die
RCBS built this die around their loading window, so you drop the bullet in through the port instead of trying to balance it on the case mouth. An internal sleeve catches and holds the bullet in alignment with the case and guides it down as the seating stem does its work. That free-floating, self-centering stem is what produces the concentric results precision reloaders chase, and it keeps your fingers clear of the shell holder on these long magnum cases.
Fit and Compatibility
This die uses the standard 7/8"-14 thread, so it threads right into any common single-stage or turret press. It's a seating die only, not a full set, which is the way a lot of precision loaders like to buy so they can pair it with the sizing setup they prefer. Made in the USA and backed by the RCBS limited lifetime warranty, it's the kind of tool you set up once and use for decades.
Key Specifications
- Manufacturer: RCBS
- Cartridge: .28 Nosler
- Die Style: Bullet Seating Die (stand-alone)
- Adjustment: Oversized micrometer, 0.001 inch increments
- Construction: Case-hardened steel, hand-polished, deep blued finish
- Seating Stem: Free-floating, self-centering
- Loading Feature: Bullet seating window with retention system
- Thread: Standard 7/8"-14
- Warranty: Limited Lifetime
- Country of Origin: Made in USA
- Manufacturer Part Number: 27440
- UPC: 850070830560
- Shipping Weight: 0.89 lb
What’s Included
- RCBS MatchMaster bullet seating die for .28 Nosler
Frequently Asked Questions
Is the MatchMaster .28 Nosler die a full set or just the seater?
This is a stand-alone bullet seating die only, not a two-die set. It does not include a sizing die, so you'll pair it with your preferred .28 Nosler sizing setup. A lot of precision loaders prefer buying the seater on its own for exactly that reason.
What makes the MatchMaster seater die different from a standard RCBS seater?
The MatchMaster uses an oversized micrometer knob that adjusts seating depth in one-thousandth-inch increments with bold, easy-to-read markings. It also features a free-floating, self-centering seating stem and a bullet loading window with a retention system for concentric, repeatable results. The construction is a step up too, with case-hardened steel, hand-polished internals, and a deep blued finish.
Will this die fit my reloading press?
Yes. It uses the standard 7/8"-14 thread, so it threads right into virtually any common single-stage or turret press.
How does the loading window work for seating .28 Nosler bullets?
Instead of balancing a bullet on the case mouth, you drop it into the window on the side of the die. An internal sleeve catches and holds the bullet in alignment with the case, then guides it as the stem seats it. It speeds things up and keeps your fingers clear of the shell holder on these longer magnum cartridges.





Reviews
There are no reviews yet.