Description
The Kicks High Flyer is one of those chokes that earns its keep the moment you put it in the field. This is a full constriction, extended tube cut for 12 gauge Benelli SBEII and Crio Plus threaded barrels, and it's machined from 17-4 stainless steel on computer-controlled equipment for tight, repeatable tolerances. The extended body reaches roughly 1.5 inches past the muzzle, and the diagonal ports around the outside do the heavy lifting when it comes to knocking down felt recoil and keeping your barrel from jumping off the bird.
What Sets the High Flyer Apart
Inside, the tube runs a conical/parallel profile that squeezes the shot column down gradually rather than all at once, which helps deliver denser, more even patterns. The exterior porting vents gas forward at an angle, acting like a built-in brake. The payoff shows up two ways: less punishment on your shoulder over a long day, and a faster, steadier follow-up shot when that second bird swings into range. Kicks rates the design at roughly a 25 percent reduction in felt recoil and around a 20 percent bump in pattern performance.
Loads the High Flyer Handles
This choke was built with steel and non-toxic loads in mind, so it's right at home for waterfowl work, but it patterns lead just as happily for dove, quail, pheasant, and other upland game. The constriction is labeled around pattern results you'll see with steel and non-toxic shot, so it's a versatile pick whether you're pass-shooting geese or working a covey. Hunters who run it tend to keep coming back for more constrictions once they see what it does downrange.
Fit and Installation
The High Flyer threads in and out by hand, so you can swap constrictions in the blind without digging for a tool. A quick snug-up with a choke wrench before you start shooting is a good habit to keep it from backing out under recoil. Just confirm your Benelli uses Crio Plus threads, since Benelli runs more than one thread system and they don't interchange.
Key Specifications
- Manufacturer: Kicks Industries
- Product Line: High Flyer
- Manufacturer Part Number: BENII12GAH.F.FULL
- UPC: 821041081311
- Gauge: 12 Gauge
- Constriction: Full
- Thread Pattern: Crio / Crio Plus
- Fits: Benelli SBEII / Crio Plus threaded barrels
- Material: 17-4 Stainless Steel
- Internal Profile: Conical / Parallel
- Porting: Diagonally-ported exterior
- Style: Extended
- Ported Section Length: 1.5 inches
- Standard Bore Size: .723 inch
- Installation: Hand-installed, no wrench required
What’s Included
- Kicks High Flyer 12 gauge full extended choke tube
Frequently Asked Questions
Will the Kicks High Flyer fit my Benelli SBEII?
This tube is threaded for Benelli Crio Plus barrels, which is the pattern used on the SBEII, along with guns like the M2 and Vinci. Benelli uses more than one thread system, and they are not interchangeable, so double-check your barrel is Crio Plus before ordering. If you're unsure, your owner's manual or the barrel markings will tell you.
Can I shoot lead and steel through the High Flyer choke?
Yes. The High Flyer is designed with steel and non-toxic loads in mind but patterns lead just as well, so it works across waterfowl and upland hunting. Kicks labels the constriction based on the pattern you'll get with steel and other non-toxic shot.
Do I need a wrench to install this choke?
No, the High Flyer threads in and out by hand, which makes swapping constrictions in the field quick and easy. That said, giving it a final snug with a choke wrench is a smart move to keep it from loosening up under recoil during a long shooting session.
How much does the ported design cut recoil?
Kicks rates the diagonal porting at around a 25 percent reduction in felt recoil along with roughly a 20 percent gain in pattern performance. The ports vent gas forward and act like a brake, which also tames muzzle jump so your follow-up shots come faster and steadier.




Reviews
There are no reviews yet.