0
0

L.E. Wilson 6mm/6.5 Creedmoor FIRED Case Holder CH-65CRE

UPC: 815145027900

$17.60

9 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you run an L.E. Wilson case trimmer and load 6mm or 6.5 Creedmoor, this is the holder that keeps your brass steady while you work. It grips the case by body taper instead of the case head, supporting the body much like the chamber of a firearm. That snug, repeatable hold is what makes Wilson trimmers so popular with precision handloaders who care about uniform case length across the whole batch.

This is the FIRED version, meaning it is cut for neck-sized brass that has already been fired and then neck sized. The diameter and length of the case determine which holder you need, and this one covers the 6mm and 6.5 Creedmoor family. Beyond trimming, the same holder carries you through primer pocket reaming, neck reaming, and deburring when paired with Wilson's tools, so it earns its spot on the bench several times over.

Why the L.E. Wilson FIRED Case Holder Earns Its Keep

The whole point of the Wilson system is consistency. Because the case is supported along the body rather than clamped at the head, you get the kind of trim-to-trim repeatability that shows up on paper downrange. When you are done, a light tap on the case mouth pops the brass right back out, so you move through a batch without fighting the tool.

Matching the Right Holder to Your Brass

Keep in mind this holder is set up for neck-sized fired cases. If you are working brand new or full-length resized brass, Wilson makes a separate NEW case version for this family. A quick note from experience: some over-sized chambers blow brass out enough that even sized cases fit the FIRED holder better, so it is worth knowing which of your rifles run generous chambers. Made in the U.S.A. and built to the tolerances handloaders have trusted from Wilson for years.

Key Specifications

  • Manufacturer: L.E. Wilson
  • Manufacturer Part Number: CH-65CRE
  • UPC: 815145027900
  • Caliber: 6mm / 6.5 Creedmoor Family
  • Type: FIRED Case Holder (for neck-sized cases)
  • Case Retention: Held by body taper, not case head
  • Compatibility: L.E. Wilson Case Trimmers and Uniform Deburring Tool
  • Country of Origin: Made in the U.S.A.
  • Shipping Weight: 0.3 lb

What’s Included

  • One L.E. Wilson 6mm/6.5 Creedmoor FIRED Case Holder (CH-65CRE)

Frequently Asked Questions

Is this Wilson case holder for new or fired brass?

This is the FIRED version, which is cut for cases that have been fired and then neck sized. If you are trimming brand new or full-length resized brass, Wilson offers a separate NEW case holder for this family. Picking the right one comes down to the diameter and length of the case you are working.

Does this holder fit both 6mm and 6.5 Creedmoor?

Yes. This CH-65CRE holder covers the 6mm and 6.5 Creedmoor family, so it works for both cartridges. The case is supported by the body taper, much like it sits in a rifle chamber.

What do I need to use the L.E. Wilson case holder?

The holder is designed to work with any model of L.E. Wilson case trimmer. Beyond length trimming, you can also use it for primer pocket reaming, neck reaming, and deburring when paired with Wilson's tools. The holder itself does not include a trimmer, so you will want one on the bench already.

How do I get the case out after trimming?

The brass releases with a light tap on the case mouth, so it comes free without a struggle. That quick in-and-out is part of what makes running a full batch through a Wilson setup go smoothly.

Additional information

UPC

815145027900

Manufacturer

Manufacturer Part Number

CH-65CRE

Shipping Weight

0.3

Reviews

There are no reviews yet.

Be the first to review “L.E. Wilson 6mm/6.5 Creedmoor FIRED Case Holder CH-65CRE”