$268.40
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you're loading .50 BMG, you already know the cases are a different animal, and a standard trimmer just isn't built to handle them. The L.E. Wilson Stainless Micro-Adjust Case Trimmer Kit is purpose-built for that massive brass, using Wilson's proven inline design that supports the case body through the cut with a holder that mimics the chamber of your rifle. That means every case comes out trimmed square and dead-on to length, which is exactly what you want when you're chasing consistency with a round this big.
The standout here is the micrometer stop, which lets you fine tune trim length in .001 inch increments. Pair that with the larger stop screw for your major length adjustments and you've got a dual-control setup that takes the guesswork out of dialing in your brass. The case holder sits in a twin-rail system that also locks in the cutter housing, so alignment stays true and your case mouths stay square from the first piece to the last. Wilson's newer trimmers run a rake-tooth cutter that's designed to shave cleanly through brass.
This is the complete kit, not just the trimmer on its own. It comes with the trimmer, a dedicated 50 BMG case holder, the trimmer stand with mounting screw, a case holder clamp, and the micrometer stop. The stand can be C-clamped to your bench or permanently mounted, and it sets the trimmer at a comfortable working height. The clamp takes the hassle out of holding the case holder down by hand, which makes a real difference when you're running a batch of big brass.
Wilson has been making case trimmers since 1936, and this one carries that reputation. The stainless steel construction stands up to corrosion and years of hard use, and the longer base is sized to handle the extended length of .50 BMG cases. It's made in the U.S.A. with American steel by a family-run company, and if you ever want to speed things up, it'll accept a Wilson power adapter so you can run it off a drill or power screwdriver.
Yes, this kit includes a dedicated 50 BMG case holder along with the trimmer. That holder supports the case body through the cut so each piece comes out square. If you want to trim other calibers, Wilson case holders for those cartridges are sold separately.
The micrometer stop lets you fine tune your trim length in .001 inch increments for precise, repeatable results. You use the larger stop screw for the big length adjustments and the micrometer for the fine tuning. It takes the guesswork out of getting your brass to an exact, consistent length.
It can. While it's designed to run by hand with the included crank, it's compatible with the Wilson Power Adapter, which is sold separately. That lets you spin it with a drill or power screwdriver to speed up larger batches of brass.
The trimmer body itself can work with cases down to around 6mm when paired with the correct Wilson case holder. The kit ships set up for 50 BMG, so you'd just add the holders for whatever other calibers you load. The longer base is sized specifically to accommodate the extended length of 50 BMG brass.
| UPC | 815145027689 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | CTS-50MKIT |
| Shipping Weight | 2.8 |
You must be logged in to post a review.
Reviews
There are no reviews yet.