$116.16
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
L.E. Wilson has been machining precision reloading tools for about 90 years, and their bushing-type full length sizing die is where a lot of serious handloaders land once they start chasing tighter groups. This one is cut for 6mm ARC and does three jobs in a single pass: it sizes the case body, bumps the shoulder back to set correct headspace, and sizes the neck down to whatever tension you choose using an interchangeable bushing. The big difference versus a standard die is how it handles the neck. Instead of dragging an expander ball through the mouth on the upstroke, it sizes the outside of the neck with a bushing, which keeps brass working to a minimum and helps your necks stay concentric.
Because neck tension is controlled by the bushing itself, you get to decide exactly how much grip you want on the bullet. Swap bushings to tune for a new lot of brass or a different load, and you can fine tune bullet grip without re-working the whole setup. Less brass movement means longer case life and more consistent seating, which is the whole point for anyone loading for precision. The die includes an adjustable depth decapping rod for dependable primer removal, and it ships with a spare decapping punch. Worth noting up front: the bushing is sold separately, so you will want to pick up the right size for your neck diameter and desired tension before your first session.
The die is made from high quality heat treated steel hardened to Wilson's own specs, which they rate as harder than a Grade 8 bolt, with stainless parts for a long lasting finish. It uses standard 7/8-14 threads, so it drops straight into just about any common single stage or progressive press. Pair it with a Wilson case gage to check your shoulder bump and keep from over-sizing your brass, and you have a setup that produces repeatable, match-grade ammo load after load. Made in the U.S.A.
No, the bushing is sold separately. This lets you choose the exact bushing size for your brass and the neck tension you want. Measure a loaded round neck diameter and subtract your desired tension to pick the right bushing before you start sizing.
A bushing die sizes the outside of the neck rather than pulling an expander ball through the inside. That reduces how much the brass gets worked, which helps keep necks concentric and extends case life. For precision handloaders, it also means you can tune neck tension precisely by swapping bushings.
Yes. It uses standard 7/8-14 threads, so it fits most common single stage and progressive presses. You will need a 6mm ARC shell holder to run it.
Yes. Because it performs full length sizing, it bumps the shoulder and sizes the body back to spec, which is what you want for reliable feeding in gas guns like AR-15 pattern 6mm ARC rifles. It works equally well for bolt guns. Pairing it with a Wilson case gage helps you set shoulder bump correctly and avoid over-sizing.
| UPC | 815145026583 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | FLD-ARC |
| Shipping Weight | 0.6 |
You must be logged in to post a review.
Reviews
There are no reviews yet.