$135.52
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
L.E. Wilson has built a reputation among precision handloaders for a reason, and this stainless steel micrometer bullet seater die chambered for 7mm Rem Mag is a great example of why. Instead of threading into a standard press, this is an inline chamber-type seater that holds both the case and bullet in near-perfect alignment while the bullet is pressed straight down into the neck. That setup is what gives you the low runout and consistent seating depth that make a real difference on paper.
The die body cradles your charged case, you drop a bullet on the case mouth, slide the cap over the top, and press down until it bottoms out. Because the case stays stationary and everything stays concentric, you get repeatable results round after round. The micrometer top is the star of the show here, graduated in .001" increments so you can fine-tune seating depth and come right back to your setting later. For bigger changes, the cap uses 3/8"-24 threads to move the stem up or down in a hurry.
Machined from stainless steel with laser-engraved markings, this die is made to hold its tolerances for the long haul. The fit between the stem and body is tight enough that you can feel the air cushion as the parts come together, which is the kind of detail Wilson is known for. It ships with the standard seating stem that handles most conventional bullet shapes, and a VLD stem is available separately if you run long, sleek match bullets.
One of the nicest things about an inline seater like this is how portable it is. Pair it with a small arbor press and you can tweak seating depth right at the bench or out at the range while you chase your rifle's sweet spot. If you load the 7mm Rem Mag for hunting or long-range work and want tighter, more uniform ammo, this is a tool that earns its keep.
No, this is an inline chamber-type hand die designed to run with a small arbor press rather than a threaded single-stage press. You can seat bullets with a soft-faced mallet in a pinch, but an arbor press is the way to get smooth, repeatable results. Wilson designed these dies to pair well with presses like the K&M Precision arbor press.
The micrometer top lets you adjust seating depth in precise .001" increments and dial right back to a known setting whenever you want. That makes it easy to test different seating depths and find where your rifle shoots best, then return to it load after load. For larger changes, the 3/8"-24 threads in the cap let you move the stem quickly.
It ships with the standard seating stem, which covers most conventional bullet shapes well. If you load long, sleek VLD or match bullets, a VLD stem is available separately. Swapping stems is simple and helps avoid marking the bullet ogive on more streamlined projectiles.
With this design the case and bullet are held in alignment inside the die body while the bullet is pressed straight down into the neck, which keeps everything concentric. That setup typically produces lower bullet runout and more consistent seating depth than a standard press and threaded die. For precision and long-range handloaders, those small gains in uniformity add up on target.
| UPC | 815145026392 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | S70-RMG |
| Shipping Weight | 1.1 |
You must be logged in to post a review.
Reviews
There are no reviews yet.