$135.52
7 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The L.E. Wilson Micrometer Bullet Seater Die for 30-06 Springfield is the tool reloaders reach for when runout and seating consistency actually matter. Instead of the threaded 7/8"-14 design most presses use, this is a chamber-type inline seater. The case and the bullet are both captured inside the die body and held in alignment before a close-fitting seating stem pushes the bullet straight into the neck. That approach is a big reason these dies have been a benchrest favorite for decades and have a reputation for producing some of the straightest loaded ammo you can make at home.
This is a hand die, so it doesn't thread into a conventional press. You set a charged case into the die body, drop a bullet on the mouth, slide the die onto its base, and seat using an arbor press or a soft-faced mallet. Wilson designed these with arbor presses like the K&M in mind, and that setup lets you feel the bullet seat the whole way down. The seater base also keeps the primer protected during seating. It ships with the standard seating stem, which handles most common bullet shapes well, and a VLD stem is available separately if you're running long, sleek match bullets.
The micrometer head is where this die earns its keep. The scale is graduated in .001" increments with laser engraved markings that are easy to read, so finding and returning to your rifle's sweet spot is quick and repeatable. For bigger changes, the 3/8"-24 threaded cap gets you close before you fine-tune with the micrometer. Machined from stainless steel and made in the USA, it's built to hold up through years of load development.
If you're chasing tight groups in the 30-06 and want seating depth you can trust round after round, this is the kind of die that quietly makes everything downrange more consistent.
No, this is a chamber-type hand die and it does not thread into a conventional press. It's designed to run with an arbor press or a soft-faced mallet. Wilson built these with arbor presses like the K&M in mind, which is the setup most precision reloaders use with them.
The micrometer head lets you adjust seating depth in .001" increments with an easy-to-read, laser engraved scale. That makes it simple to find your rifle's preferred seating depth and return to it exactly, load after load. For large changes, the 3/8"-24 threaded cap gets you close before you fine-tune with the micrometer.
It ships with the standard seating stem, which works well for most conventional bullet shapes. If you're seating long, high-BC match bullets, a VLD stem is available separately to better match the bullet ogive. Trying the standard stem first is usually the way to go, since it covers the majority of bullets.
A chamber-type seater like this one captures both the case and the bullet in alignment before the bullet is pushed straight into the neck by a close-fitting stem. By keeping everything inline and removing the threads from the seating operation, it tends to produce rounds with less runout. That consistency is why these have long been a benchrest favorite.
| UPC | 815145026309 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | S30-06 |
| Shipping Weight | 1.1 |
You must be logged in to post a review.
Reviews
There are no reviews yet.