$135.52
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The L.E. Wilson Micrometer Bullet Seater Die for 6mm PPC is a straight-line, chamber-type seater that holds both the case and the bullet in perfect alignment before the bullet ever starts moving. Instead of threading down like a conventional 7/8-14 die, the case and bullet are captured in a chamber that mimics your rifle, and a close-fitting stem pushes the bullet straight down into the neck. That inline approach is a big part of why these dies have a reputation for cutting runout and tightening groups, and why they've been a benchrest favorite for generations.
The micrometer top is the real workhorse here. It reads in .001 inch graduations, so you can adjust seating depth precisely and come right back to a setting you liked before. Jumping between loads or chasing the lands to find your chamber's sweet spot is simple, and bigger moves can be made through the 3/8-24 threaded cap. The seating stem and bore hole are machined to extremely tight tolerances, which keeps the bullet guided and square the whole way in.
Wilson machines these from 416 and 303 stainless, so the die holds up to years of bench time and keeps its finish. Markings are laser engraved, and the whole thing has just one moving part during the seating stroke, which keeps things consistent round after round. It's precise enough for benchrest work but equally at home for anyone loading match ammo for F-Class, High Power, or PRS.
This is an arbor press die, not a conventional press die. You seat bullets with a mallet or an arbor press, which also makes it easy to toss the press and die in your range bag to fine tune seating depth without a drive back home. For 6mm PPC shooters chasing the smallest possible groups, it's one of the most trusted seaters you can put on the bench.
Yes. This is a chamber-type hand die meant to be run with an arbor press or tapped with a mallet. It is not designed for a conventional threaded reloading press, so plan on an arbor press to get the most out of it.
The case and bullet are fully captured in a chamber and held in alignment before the stem ever pushes the bullet. Because there's no threaded die body introducing play, the bullet enters the neck dead straight, which reduces runout. That alignment is why these have been a benchrest staple for decades.
The micrometer head is graduated in .001 inch increments, and you can split those marks finer by feel if you want. It also lets you return to a previous setting easily, so bouncing between different loads or rifles is quick and repeatable.
That's one of the best parts of an arbor press setup. You can bring the press and die to the range, load bullets long, and adjust seating depth on the spot to find your chamber's optimal setting without multiple trips back to the bench.
| UPC | 815145022660 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | S6M-PPC |
| Shipping Weight | 0.9 |
You must be logged in to post a review.
Reviews
There are no reviews yet.