$33.99
55 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Starline has been drawing brass in Missouri for decades, and their 6.5 Creedmoor cases have earned a loyal following among reloaders who want match-grade consistency without paying premium-brand money. These are brand new, unprimed cases built for the large rifle primer pocket, ready for you to prep, prime, charge and seat however your load workup dictates. If you're already feeding a 6.5 Creedmoor, you know the cartridge was designed as a target round in 2007 and went on to dominate precision shooting and hunting thanks to its efficient case geometry, 30 degree shoulder and minimal body taper.
Starline uses a 70/30 copper-zinc alloy and a vertical drawing process that keeps wall thickness variation to a minimum, which translates to more uniform case volume and better chamber fit. The cases are annealed between draws for consistent metallurgy across lots, and Starline builds its own tooling to punch clean primer pockets and flash holes in-house. Every caliber goes through multiple hand inspections during production, and that attention to detail shows up at the loading bench.
As with any new rifle brass, it's smart to run these through a full-length size, trim to length, then chamfer and deburr the case mouths before your first loading. A quick pass through the flash holes never hurts either. Reloaders regularly report strong primer pocket life and many firings per case, with plenty running eight to ten loadings and still measuring tight. The large rifle primer pocket gives you broad component flexibility, which is handy when primer availability gets tight.
Whether you're chasing small groups off the bench, shooting matches or loading up hunting rounds, this is brass you can build a reliable, repeatable load on. Pair it with quality primers, powder and bullets and these cases will reward careful prep with consistent velocities and good case life.
This is the large rifle primer pocket version. If your load data or component supply is built around large rifle primers, these are the cases you want. Starline also offers a small primer pocket version separately, so double check which one fits your workup.
Like any new rifle brass, it's a good idea to full-length size, trim to length, then chamfer and deburr the case mouths before your first loading. Running a quick deburring pass on the flash holes is worth it too. A little prep up front gives you the most consistent results and helps the brass last.
Case life depends on your load pressure, sizing practices and whether you anneal, but reloaders regularly report many firings per case with primer pockets staying tight. It's common to see eight to ten loadings or more out of well-cared-for brass. Keeping loads sensible and sizing only what you need will stretch that even further.
These are unprimed brass cases only, sold as a reloading component. There is no primer, powder or bullet included, so you'll supply those yourself during your handloading process. This is not ready-to-fire ammunition.
| UPC | 810742025649 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 65CREEDMOOREUP50 |
| Caliber/Gauge | 6.5mm Creedmoor |
| Length | 1.908"-1.912" |
| Product Type | Rifle |
| Quantity | 50 Per Bag |
| Style | Large |
You must be logged in to post a review.
Reviews
There are no reviews yet.