Description
The Thompson Center Bore Driver takes the hassle out of loading a modern inline muzzleloader. Instead of fighting a tight sabot down the bore, you drop the bullet in nose-first and the polymer base leads the way, so each shot seats the same as the last. That consistency is what makes this .50 caliber, 290 grain load a favorite come muzzleloader season.
What Sets the Bore Driver Apart
At the core of this system is a polymer base that replaces the traditional sabot. It carries a post that fits up into the bottom of the bullet, and when the charge ignites, that post swells to grip the inside of the projectile while the skirt bites into the rifling. The result is a tight gas seal and strong energy transfer, which translates to better accuracy and more punch downrange. The base is rated to handle charges up to 150 grains, so there is plenty of room to tune a load for your rifle.
Hornady FTX Terminal Performance
Sitting on top of that base is Hornady's proven FTX bullet. The .499 diameter copper-alloy jacketed projectile carries a Flex Tip that kicks off expansion even at the slower velocities muzzleloaders are known for, while the InterLock ring holds the core and jacket together for deep penetration and solid weight retention. That combination makes it a dependable choice for deer, elk, and other medium to large game.
Real-World Loading and Range Notes
Field testing in rifles like the T/C Triumph has shown this bullet running around 1,415 fps over a 100-grain charge and closer to 1,575 fps with a 150-grain load, so it pairs nicely with popular inlines and powders like Blackhorn 209. The 290 grain weight strikes a good balance of flat flight and knockdown, and because it loads clean without a sabot, you spend less time wrestling your ramrod and more time on target.
Key Specifications
- Manufacturer: Thompson Center
- Manufacturer Part Number: 9012R
- UPC: 810180301497
- Caliber: .50
- Bullet Weight: 290 Grain
- Bullet Diameter: .499"
- Bullet Type: Hornady FTX (Flex Tip Expanding)
- Construction: Copper Alloy Jacket
- Base: Polymer Gas-Seal (No Sabot)
- Ballistic Coefficient (G1): 0.135
- Max Powder Charge: 150 Grains
- Quantity: 20 Pack
- Shipping Weight: 0.98 lbs
What’s Included
- 20 Thompson Center Bore Driver .50 cal 290gr FTX muzzleloader bullets
- Four 5-round speed loader tubes
Frequently Asked Questions
Do the Thompson Center Bore Driver bullets need a sabot?
No, these are designed to run without one. A polymer gas-seal base replaces the traditional sabot, so you load the bullet nose-first and the base leads into the barrel. That makes seating faster and more consistent from shot to shot.
What size muzzleloader does the Bore Driver .50 cal fit?
It is built to fit the bore of any .50 caliber muzzleloader rifle, with a .499 diameter bullet and base. It works well in modern inline rifles like the T/C Encore and Triumph. The polymer base is rated for charges up to 150 grains.
How many bullets and speed loaders come in the box?
Each box holds 20 of the 290 grain FTX bullets. They come packaged in four 5-round tubes that double as speed loaders, so you can grab one and carry it afield for quick follow-up loads.
Is the Bore Driver 290gr a good choice for deer and elk?
Yes, the Hornady FTX projectile is built for medium to large game in that general weight class. The Flex Tip starts expansion even at lower muzzleloader velocities, and the InterLock ring helps the bullet hold together for deep penetration. Many hunters run it on deer and elk with a tuned charge.




Reviews
There are no reviews yet.