Description
The Johnny Stewart RR1 Raptor Optima HP is a close-range specialist. It's the tightest of the standard Raptor lineup, and it earns that spot by putting a dense core of pellets exactly where you're looking when targets or birds are up close. If you shoot early-season doves over decoys, timber ducks, or close-flushing game, this is the constriction that keeps your pattern working instead of blowing open too soon.
What Sets the RR1 Raptor Apart
The magic here is in the internal geometry. Rather than relying on a simple taper, the RR1 uses a series of internal cuts that were developed and refined over years of pattern testing at Rob Roberts Custom Gun Works. The goal is a hotter core pattern that stays consistent, and the payoff is more effective pellets on the target at the ranges this choke was built for. Pair it with the right load and you'll see the density difference on paper.
Stainless Build and Optima HP Fitment
This tube is machined from 17-4 PH U.S. stainless steel, a hardened alloy chosen for durability and corrosion resistance, so it holds up to heavy range days and damp field conditions without babying. This particular version is cut for the Beretta Optima HP thread pattern, which is the system found on the A400 family, the 690 and 692, the DT11, and other Optima HP barrels. It's important to match the choke to an Optima HP barrel specifically rather than an older Optima or Optima Plus barrel, since the thread and bore specs differ.
A Note on Over-and-Under Setups
If you're running an over-and-under, the Raptor design only allows one RRaptor choke to be installed in a single barrel. It won't seat in both, so plan your setup with that in mind. For a semi-auto like an A400, that's a non-issue and you're good to go. It's a purpose-built choke for the shooter who knows their range and wants to make it count.
Key Specifications
- Manufacturer: Johnny Stewart (Rob Roberts Custom Gun Works)
- Model: RR1 Raptor Optima HP
- Manufacturer Part Number: 200319
- UPC: 810174902280
- Gauge: 20 Gauge
- Choke System / Fitment: Beretta Optima HP
- Constriction Range: RR1 (close-range / tightest of standard Raptor series)
- Material: 17-4 PH U.S. Stainless Steel
- Style: Extended, internal cut design
- Best Use: Close-range targets and hunting
What’s Included
- (1) Johnny Stewart RR1 Raptor Optima HP choke tube, 20 gauge
Frequently Asked Questions
What shotguns does the RR1 Raptor Optima HP 20 gauge fit?
This choke is threaded for the Beretta Optima HP system, which includes the A400 family, the 690 and 692, the DT11, and other Optima HP barrels. Make sure your barrel is specifically an Optima HP pattern and not an older Optima or Optima Plus barrel, since those use different threads and bore dimensions. If you're unsure, check the markings on your barrel or your factory choke tube.
How is the RR1 different from the RR2 and RR3 Raptor chokes?
The RR1 is the tightest of the three and is built for close-range targets and game. The RR2 opens things up a bit for mid-range work like duck and dove, while the RR3 is the long-range option geared toward geese and open-water ducks. Pick your constriction based on the distances you typically shoot.
Can I run the RR1 Raptor in both barrels of my over-and-under?
No. The Raptor design only allows one RRaptor choke to be installed in a single barrel, so it won't seat in both barrels of an over-and-under. If you shoot a semi-auto like a Beretta A400, this isn't a concern at all.
What makes the RR1 Raptor pattern so tight?
It comes down to the internal cut geometry that Rob Roberts developed through years of pattern testing. Instead of a plain taper, those internal cuts help deliver a hotter, denser core pattern at close range. Matching it with an appropriate load lets you get the most out of the design.




Reviews
There are no reviews yet.