Description
The Rob Roberts RR1 Raptor is the tightest, most close-range focused tube in the Raptor lineup, designed to stack birds inside those quick, over-the-decoys and early-flush distances where a fast, concentrated pattern matters most. Internal cuts machined into the choke tighten up your core density when you match it with the right load, giving you a payload that hits with authority before your shot string has a chance to open up too far.
What Sets the RR1 Raptor Apart
This one comes out of years of development from Rob Roberts Custom Gun Works, a name that carries real weight in the competition and waterfowl worlds. The Raptor series was engineered to deliver a hotter core pattern than a standard factory tube, using tighter machining tolerances and a redesigned internal geometry. The RR1 sits at the close-range end of the family, with the RR2 covering mid-range and the RR3 built for the longer stuff. If most of your shooting happens up close and personal, the RR1 is the one you reach for.
Built From 17-4 PH Stainless
The body is machined from 17-4 PH U.S. stainless steel, which is a precipitation-hardening alloy known for strength and corrosion resistance. That matters in a duck blind or a wet October field where lesser tubes start to pit and seize. The extended portion wears a Cerakote finish with machined claw marks instead of traditional knurling, so you get a solid grip for hand-tightening and a look that stands apart from the crowd.
Fitment for Mobil 20 Gauge Guns
This tube is cut for the 20 gauge Beretta Mobil and Benelli Standard thread system, which covers a long list of popular guns including many Beretta Silver Pigeon field models, the A300 Outlander, and Benelli semi-autos like the Montefeltro, Legacy, and Super Nova. Before ordering, it's always smart to confirm your barrel uses the Mobil system, since Crio, Crio Plus, and Optima HP guns take a different tube. When in doubt, match the choke threads to your barrel and you'll be set.
Key Specifications
- Manufacturer: Rob Roberts Custom Gun Works
- Model: RR1 Raptor
- Manufacturer Part Number: 200309
- UPC: 810174902181
- Gauge: 20 Gauge
- Thread System: Beretta Mobil / Benelli Standard
- Material: 17-4 PH U.S. Stainless Steel
- Finish: Cerakote with machined claw marks
- Style: Extended
- Constriction Series: RR1 (close-range)
- Intended Use: Close-range wingshooting
What’s Included
- One RR1 Raptor Mobil 20 gauge choke tube
Frequently Asked Questions
What shotguns will the RR1 Raptor Mobil 20 gauge choke tube fit?
It's cut for the 20 gauge Beretta Mobil and Benelli Standard thread system. That covers a lot of ground, including many Beretta Silver Pigeon field models, the A300 Outlander, and Benelli guns like the Montefeltro, Legacy, and Super Nova. Check that your barrel is Mobil-threaded rather than Crio, Crio Plus, or Optima HP before ordering.
What kind of shooting is the RR1 constriction best for?
The RR1 is the close-range tube in the Raptor family, so it shines on birds taken inside shorter distances where you want a dense, hard-hitting core. Think over-the-decoys work, early flushes, and tight cover. If you're reaching out farther, the RR2 and RR3 tubes are built for mid and long range.
Can I run the RR1 Raptor in both barrels of my over/under?
No. Rob Roberts designed the Raptor so it goes in only one barrel of an over/under. The tube's design doesn't allow placement in both barrels, so you'd pair it with a different choke in the second barrel.
Is 17-4 PH stainless a good material for a choke tube?
It's a strong choice. 17-4 PH is a precipitation-hardening stainless known for high strength and solid corrosion resistance, which is exactly what you want in wet waterfowl and field conditions. It holds up far better than cheaper tubes that tend to pit or seize over time.




Reviews
There are no reviews yet.