0
0

Rob Roberts RR2 Raptor Choke Tube 20 Gauge Invector Plus 17-4 SS

UPC: 810174902099

$123.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Rob Roberts RR2 Raptor is the mid-range piece of the Raptor lineup, and it earns that spot. Where the RR1 handles close work and the RR3 reaches out for geese and open water, the RR2 sits right in the sweet spot most wingshooters live in: decoying ducks and dove over the field. The internal cuts are shaped to squeeze the pattern into a dense, hot core when you feed it the right loads, which translates to cleaner kills and fewer cripples when birds are working that middle distance.

What Sets the RR2 Raptor Apart

This choke comes out of the Raptor series, built on the same thinking as Rob Roberts' Triple Threat tubes but with newer technology folded in. Instead of the traditional knurling, the Raptor tubes wear machined claw marks and an E-Series Cerakote finish, so they look as sharp as they shoot and grip well when you're threading them in with cold hands. The whole design is aimed at a tighter, more consistent center pattern than a factory tube tends to give you.

Built From 17-4 PH Stainless

Every RR2 Raptor is machined from 17-4 PH U.S. stainless steel, a precipitation-hardening alloy that shrugs off corrosion and holds its tolerances round after round. That matters in a duck blind where moisture, salt, and mud are part of the deal. Rob Roberts holds these to tolerances well past the industry standard, and it shows in how the patterns stack up on paper.

Fitting the RR2 Raptor to Your Shotgun

This one is cut for the Browning Invector Plus system in 20 gauge, so it drops into Invector Plus marked 20 gauge Brownings and compatible guns like the Maxus, Winchester SX2, SX3, and SX4. Always check the stamp on your barrel first, since Standard Invector and Invector-DS tubes are not interchangeable with Invector Plus. One thing worth knowing on over-under guns: a Raptor choke can only go in a single barrel because of how it's designed, so you won't be running two of them at once.

Key Specifications

  • Model: RR2 Raptor
  • Manufacturer: Rob Roberts Gun Works
  • Manufacturer Part Number: 200300
  • UPC: 810174902099
  • Gauge: 20 Gauge
  • Choke System: Browning Invector Plus
  • Material: 17-4 PH U.S. Stainless Steel
  • Series: Raptor
  • Intended Range: Mid-range
  • Best Use: Duck and dove hunting
  • Finish: E-Series Cerakote with machined claw marks

What’s Included

  • Rob Roberts RR2 Raptor Invector Plus 20 gauge choke tube

Frequently Asked Questions

What kind of hunting is the RR2 Raptor built for?

The RR2 is the mid-range choke in the Raptor series, tuned specifically for duck and dove hunting. Its internal cuts pack the pattern into a dense core at that middle working distance where most decoying birds show up. If you need something tighter for geese and open water, that's where the RR3 comes in, and the RR1 covers closer shots.

Will the RR2 Raptor fit my 20 gauge shotgun?

This tube is cut for the Browning Invector Plus system in 20 gauge, so it fits Invector Plus marked 20 gauge Brownings and compatible guns like the Maxus and Winchester SX2, SX3, and SX4. Check the stamp on your barrel before ordering, because Standard Invector and Invector-DS tubes are a different thread and won't interchange. When in doubt, look at the marking near the receiver.

Can I run two RR2 Raptor chokes in an over-under?

No. Because of how the Raptor is designed, an over-under can only take a Raptor choke in one barrel, not both. You'll pick the barrel you want it in and run a standard tube in the other.

What is the RR2 Raptor made from and why does it matter?

It's machined from 17-4 PH U.S. stainless steel, a precipitation-hardening alloy known for corrosion resistance and holding tight tolerances. That's a real benefit for waterfowlers dealing with moisture, mud, and the occasional salt marsh. It also means the tube keeps patterning consistently over a long season of hard use.

Additional information

UPC

810174902099

Manufacturer

Manufacturer Part Number

200300

Caliber/Gauge

20 Gauge

Reviews

There are no reviews yet.

Be the first to review “Rob Roberts RR2 Raptor Choke Tube 20 Gauge Invector Plus 17-4 SS”