Description
Bismuth has earned its spot in a lot of shell boxes, and it patterns very differently than lead or steel. That's exactly the problem this choke solves. The Rob Roberts Biz Raptor is one of the few tubes designed from the ground up around bismuth shot, and it fits Browning and Winchester shotguns cut for the Invector Plus system. If you've been shooting bismuth through a general-purpose choke and wondering why your patterns look uneven, this is the piece that squares things up.
What Sets the Biz Raptor Choke Apart
The internal geometry here is tuned specifically for how bismuth behaves down the bore. Bismuth is softer and lighter than steel but denser than most non-tox alternatives, so it needs its own constriction profile to pattern tight and consistent. Rob Roberts Gun Works spent years developing the Raptor series, and this Biz version is the payoff for anyone running pure bismuth on ducks, geese, or upland birds where a clean, even pattern matters.
Materials and Build on the Biz Raptor
Every tube is machined from 17-4 PH U.S. stainless steel, a heat-treatable alloy known for holding up to repeated firing and resisting corrosion in wet blind conditions. The tolerances run tighter than the industry norm, and each tube is laser marked so you can grab the right one without squinting. It threads in by hand and seats flush, so there's nothing hanging off the muzzle to snag.
One thing worth knowing up front: this choke is meant for 100 percent bismuth loads only, not blended shot. If you shoot an over-under, keep in mind the Raptor design goes in one barrel only. Pattern it with your go-to bismuth loads before the season and you'll know exactly what your gun is doing at range.
Key Specifications
- Manufacturer: Johnny Stewart / Rob Roberts Gun Works
- Manufacturer Part Number: 200298
- UPC: 810174902075
- Gauge: 12 Gauge
- Choke System: Browning/Winchester Invector Plus
- Series: RRaptor
- Optimized Load: 100% Bismuth (BIZ) Shot
- Material: 17-4 PH U.S. Stainless Steel
- Mount Style: Flush
- Country of Origin: United States
What’s Included
- Biz Raptor Invector Plus choke tube (1)
Frequently Asked Questions
What shotguns does the Biz Raptor Invector Plus choke fit?
It's cut for the Browning and Winchester Invector Plus threading, which is standard on 12 gauge Maxus, Citori, Cynergy, Silver, BPS, and BT-99 models among others. Invector Plus tubes are longer than Standard Invector, so they only fit barrels marked Invector Plus. Check your barrel or manual before ordering to be sure you have the right system.
Can I shoot steel or lead through the Biz Raptor choke?
This tube is built specifically for 100 percent bismuth shot, and Rob Roberts advises against running blended shot through it. Bismuth patterns differently than steel or lead, which is the whole reason this choke exists. For those other loads you'd want a different tube from the Raptor lineup.
Why choose a dedicated bismuth choke instead of a standard one?
Bismuth is denser than most non-toxic alternatives but softer than steel, so it responds best to a constriction profile designed around it. A general-purpose choke can leave you with patchy or inconsistent patterns. This one is tuned to keep bismuth shot dense and even where it counts.
Can I use the Biz Raptor choke in both barrels of my over-under?
No, the design only allows placement in one barrel of an over-under. That's a characteristic of the Raptor series geometry. Run it in the barrel you want tuned for your bismuth loads and pattern accordingly.




Reviews
There are no reviews yet.