Description
When the birds are hanging out past the range where most chokes start to fall apart, the RR3 Raptor is the tube you want screwed into your barrel. It sits at the top end of Rob Roberts' Raptor lineup as the long-range constriction, purpose-built for geese and open-water ducks where every extra yard of reach matters. This is the Invector Plus version, so it threads right into Browning and Winchester barrels running that system.
What Sets the RR3 Raptor Apart
The Raptor series was designed around wing shooting, carrying the same thinking behind Rob Roberts' Triple Threat chokes but adding newer tech to squeeze out a hotter core pattern. Internal cuts do the heavy lifting here, keeping your shot column dense and holding it together downrange when you pair the choke with the right loads. Where the RR1 covers close work and the RR2 handles mid-range duck and dove, the RR3 is the one reaching for distance.
Built From 17-4 PH Stainless Steel
Every Raptor tube is machined from 17-4 PH U.S. stainless steel, the same tough material that stands up to heavy steel and tungsten waterfowl loads without flinching. Rob Roberts runs computerized pattern analysis and machines to tolerances well past the industry norm, which is a big part of why these chokes have the reputation they do. Instead of the traditional knurling, the Raptor tubes wear machined claw marks and an E-Series Cerakote finish, so they look the part in the blind too.
Getting the Most From Your RR3 Raptor
Patterning is everything with a long-range choke, so spend some time at the pattern board with a few different loads before the season opens. The RR3 rewards you for finding the shell it likes, and once you dial that in you'll have a rig that stretches your effective range on high birds and passing geese. Keep in mind that on over/under shotguns, an RRaptor choke can only be run in one barrel by design.
Key Specifications
- Manufacturer: Johnny Stewart / Rob Roberts Gun Works
- Model: RR3 Raptor
- Manufacturer Part Number: 200296
- UPC: 810174902051
- Gauge: 12 Gauge
- Choke System: Invector Plus
- Constriction / Range: Long-range
- Intended Use: Geese and open-water ducks
- Material: 17-4 PH U.S. Stainless Steel
- Series: Raptor Choke Series
- Finish: E-Series Cerakote with machined claw marks
What’s Included
- RR3 Raptor Invector Plus 12 gauge choke tube
Frequently Asked Questions
What shotguns does the RR3 Raptor Invector Plus choke fit?
This version is threaded for the Invector Plus system, which is found on many newer Browning and Winchester 12 gauge shotguns. Look for "Invector Plus," "INV Plus," or "Invector +" marked on your barrel or existing chokes. Invector Plus, Standard Invector, and Invector DS are not interchangeable, so double-check before ordering.
What's the difference between the RR1, RR2, and RR3 Raptor chokes?
The three cover different distances in the Raptor lineup. The RR1 is tuned for close-range targets, the RR2 handles mid-range duck and dove work, and the RR3 is the long-range tube built for geese and open-water ducks. Pick the RR3 when you need the most reach.
Can I shoot steel and tungsten loads through the RR3 Raptor?
Yes. The 17-4 PH U.S. stainless steel construction is made to handle heavy steel and tungsten waterfowl loads, which is exactly what this choke was designed for. As always, pattern your specific load before hunting to confirm it performs the way you want.
Can I use the RR3 Raptor in both barrels of my over/under?
No. By design, an RRaptor choke can only be run in one barrel of an over/under. If you're shooting a double gun, plan to fit the RR3 in a single barrel and choose a different tube for the other.





Reviews
There are no reviews yet.