0
0

Johnny Stewart RR1 Raptor Invector Plus 12 Gauge Choke Tube

UPC: 810174902037

$123.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RR1 Raptor is the tightest choke in Rob Roberts' Raptor lineup, built under the Johnny Stewart brand for close-range work where a dense, hard-hitting core makes the difference. Rob Roberts has done choke and barrel work for Benelli's Performance Shop for years, and that same pattern-testing know-how is machined right into this tube. Internal cuts are designed to stack pellets into a hot center pattern, and it drops straight into any 12 gauge barrel cut for the Browning Invector Plus system.

What Sets the RR1 Raptor Apart

The Raptor series was developed as a wing-shooting choke that borrows the same thinking behind the well-known Triple Threat line, then adds newer machining tech to deliver a hotter core than the older designs. The RR1 is the close-range member of that family, so it shines on birds worked in tight over decoys or busted out of heavy cover where you want your shot column concentrated fast. Pair it with the correct loads and you'll see the internal geometry do exactly what it was cut to do.

Built From 17-4 PH Stainless

Every Raptor tube is turned from 17-4 PH U.S. stainless steel and machined to tolerances well past the usual industry standard. That grade of stainless holds up to corrosion and repeated shooting, so this is a choke you thread in and forget about for a long time. The Raptor tubes wear machined claw marks instead of traditional knurling, giving you grip when you're wrenching it in or out with cold hands.

Fitment and a Note on Over-Unders

This one is cut for Browning Invector Plus threading, which covers a wide range of 12 gauge Browning and Winchester barrels running the .742 bore family. It's a twist-in, twist-out install that takes seconds. One thing worth knowing on stack-barrel guns: because of how the Raptor is designed, you can only run it in one barrel of an over-under, not both. In a pump or semi-auto it's a straightforward single-choke setup.

Key Specifications

  • Manufacturer: Johnny Stewart (Rob Roberts Gun Works)
  • Model: RR1 Raptor
  • Manufacturer Part Number: 200294
  • UPC: 810174902037
  • Gauge: 12 Gauge
  • Choke System: Browning Invector Plus
  • Constriction Range: Close-range / tight core pattern
  • Material: 17-4 PH U.S. Stainless Steel
  • Finish: E-Series Cerakote with machined claw marks
  • Intended Use: Close-range wing shooting

What’s Included

  • Johnny Stewart RR1 Raptor Invector Plus 12 gauge choke tube

Frequently Asked Questions

What is the RR1 Raptor choke best used for?

The RR1 is the close-range choke in the Raptor series, so it's built for birds that come in tight over decoys or flush out of heavy cover. Its internal cuts concentrate the shot into a hot core pattern for fast, dense hits up close. Match it with the loads it was designed around to get the most out of that pattern.

Will the RR1 Raptor fit my shotgun?

This tube is machined for the Browning Invector Plus threading, which fits a wide range of 12 gauge Browning and Winchester barrels using that system. If your barrel is marked Invector Plus or takes Invector Plus tubes, this will thread right in. If you're unsure, check your barrel or owner's manual before ordering.

Can I run the RR1 Raptor in both barrels of my over-under?

No. Because of how the Raptor is designed, it can only be installed in one barrel of an over-under. In a pump or semi-auto it's a simple single-choke setup with no issue.

What is the RR1 Raptor made of and how durable is it?

It's turned from 17-4 PH U.S. stainless steel and machined to tolerances well beyond the industry standard. That stainless resists corrosion and stands up to plenty of shooting, so it holds its pattern integrity over years of use. A quick clean after each outing keeps it performing like new.

Additional information

UPC

810174902037

Manufacturer

Manufacturer Part Number

200294

Caliber/Gauge

12 Gauge

Reviews

There are no reviews yet.

Be the first to review “Johnny Stewart RR1 Raptor Invector Plus 12 Gauge Choke Tube”