Description
Tungsten Super Shot changed the game for wing shooters, and this choke was designed around it. The Johnny Stewart Raptor TSS Invector choke comes straight out of the Rob Roberts Gun Works shop under part number 200289, cut for 20 gauge Invector-threaded shotguns. It's machined from 17-4 PH U.S. stainless steel and tuned to get the most out of premium tungsten loads, which is a different animal than steel or lead. TSS pellets are dense and hard, so they behave differently going down the barrel, and a choke built around that behavior helps you print the kind of dense, even patterns TSS is famous for.
Why the Raptor TSS Is Built Around Tungsten
TSS runs about 18 grams per cubic centimeter, which is denser than lead and a good bit harder too. That density is exactly why hunters reach smaller pellet sizes and still stretch their effective range on ducks and upland birds. The Raptor TSS choke is part of Rob Roberts' larger Raptor series, where each tube is matched to a specific shot type. This one exists so your tungsten loads leave the muzzle with the pattern integrity they're capable of, instead of getting choked wrong and throwing away performance.
Fit and Build on the Raptor TSS Invector
This tube is cut for the standard Invector thread pattern, so it drops into a wide range of Browning and compatible 20 gauge guns running that system. Note it's the standard Invector pattern, not Invector Plus or Invector DS, so double check your barrel before ordering. The 17-4 PH stainless construction shrugs off moisture and corrosion, which matters when you're hunting wet fields and marshes season after season.
Running the Raptor TSS in the Field
A quick word from experience: TSS patterns tight on its own, so this tube is doing purposeful work matching constriction to that dense shot column. If you shoot an over/under, keep in mind a Raptor choke can only go in one barrel by design. Pattern your gun with the exact TSS loads you plan to hunt before opening day and you'll know precisely what your setup does at the ranges you shoot.
Key Specifications
- Manufacturer: Johnny Stewart (Rob Roberts Gun Works)
- Manufacturer Part Number: 200289
- UPC: 810174901986
- Gauge: 20 Gauge
- Choke Series: Raptor TSS
- Thread Pattern: Invector
- Material: 17-4 PH U.S. Stainless Steel
- Optimized For: Tungsten Super Shot (TSS)
- Application: Wing shooting / upland / waterfowl
- Style: Extended
- Country of Origin: United States
What’s Included
- One Johnny Stewart Raptor TSS Invector 20 gauge choke tube
Frequently Asked Questions
What shotguns does the Raptor TSS Invector 20 gauge choke fit?
This tube is threaded for the standard Invector pattern used across many 20 gauge Browning and compatible shotguns. It's important to confirm your barrel is the standard Invector system and not Invector Plus or Invector DS, since those use different threads. When in doubt, check your gun's manual or the markings near the muzzle before ordering.
Why get a choke made specifically for TSS instead of a standard choke?
Tungsten Super Shot is denser and harder than lead or steel, so it moves through a choke differently and patterns very tight on its own. The Raptor TSS is machined with that behavior in mind to help you get clean, even, dense patterns from your tungsten loads. Matching the tube to the shot type is how you get the downrange consistency TSS is known for.
Can I use the Raptor TSS choke in both barrels of an over/under?
No. By design, a Raptor choke can only be installed in one barrel of an over/under shotgun. If you run a stacked gun, plan to fit this tube in a single barrel.
Is the Raptor TSS choke durable enough for wet-weather hunting?
Yes. It's machined from 17-4 PH U.S. stainless steel, which resists corrosion and holds up well to the moisture and grime that come with marsh and field hunting. With regular cleaning it'll serve you season after season.




Reviews
There are no reviews yet.