0
0

Johnny Stewart Raptor Turkey Choke Invector Plus 20 Gauge Stainless

UPC: 810174901702

$115.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Raptor Turkey Choke from Johnny Stewart (built by Rob Roberts Gun Works) takes the guesswork out of setting up a 20 gauge for gobblers. Instead of making you fuss over multiple constrictions, this tube uses a single constriction tuned specifically for the 20 gauge Invector Plus platform, so you can thread it in and start patterning. It's cut from 17-4 PH U.S. stainless steel and wears a green Cerakote finish, with machined claw marks along the body that give you real grip when you're installing or backing it out by hand.

What Sets the Raptor Turkey Choke Apart

The whole point of this tube is a hotter core pattern at range. Turkey hunters who have run the Raptor have reported seriously dense patterns downrange, and the design pairs especially well with high-density TSS loads as well as quality copper-plated lead. It also plays nice with any barrel length, so whether you're running a stubby compact autoloader or a longer field barrel, the pattern performance stays consistent. Just keep in mind that on an over/under, a Raptor choke is meant to live in one barrel only.

Fitment for Your 20 Gauge Invector Plus

This choke is threaded for the Browning and Winchester Invector Plus system in 20 gauge. That covers a lot of popular guns like the Maxus, Citori, Cynergy, Silver, and BPS, and Winchester models cut to the same pattern. Before you buy, glance at the stamp on your barrel and confirm it reads Invector Plus, since these longer tubes won't interchange with Standard Invector or Invector-DS threads.

Setting It Up Right

As with any turkey choke, the magic happens at the pattern board. Every gun and load combination shoots a little different, so grab a few boxes of your chosen turkey ammo and pattern at your expected shot distance to see where things really tighten up. Do that homework and the Raptor rewards you with a confident, repeatable pattern when a longbeard finally struts into range.

Key Specifications

  • Manufacturer: Johnny Stewart (Rob Roberts Gun Works)
  • Model: Raptor Turkey Choke
  • Manufacturer Part Number: 200261
  • UPC: 810174901702
  • Gauge: 20 Gauge
  • Choke System: Browning/Winchester Invector Plus
  • Intended Use: Turkey Hunting
  • Material: 17-4 PH U.S. Stainless Steel
  • Finish: Green Cerakote
  • Compatible Loads: TSS and Lead
  • Grip Feature: Machined Claw Marks
  • Country of Origin: United States

What’s Included

  • Johnny Stewart Raptor Turkey Choke, 20 Gauge Invector Plus (1)

Frequently Asked Questions

Will the Raptor Turkey Choke fit my 20 gauge shotgun?

It's threaded for the Browning and Winchester Invector Plus system in 20 gauge, which includes guns like the Maxus, Citori, Cynergy, Silver, and BPS. Check the stamp on your barrel and make sure it reads Invector Plus before ordering. These longer tubes are not interchangeable with Standard Invector or Invector-DS threads.

What kind of ammo works best with this Raptor Turkey Choke?

It's built to shine with TSS (Tungsten Super Shot) loads and quality copper-plated lead turkey loads. The single constriction is tuned to squeeze a dense core pattern out of those heavier payloads. As always, pattern your specific load to find the sweet spot for your gun.

Can I run this choke in both barrels of my over/under?

No. The Raptor design is meant to be used in only one barrel of an over/under, since the tube's design does not allow placement in both. In a single-barrel pump or autoloader you're good to go.

Do I need a wrench to install the Raptor Turkey Choke?

The tube has machined claw marks along the body that give you extra grip for hand-tightening and removal. Just make sure the shotgun is unloaded, thread it in securely by hand, and confirm it's snug before you head to the pattern board.

Additional information

UPC

810174901702

Manufacturer

Manufacturer Part Number

200261

Caliber/Gauge

20 Gauge

Reviews

There are no reviews yet.

Be the first to review “Johnny Stewart Raptor Turkey Choke Invector Plus 20 Gauge Stainless”