Description
The Rob Roberts Final Strut Turkey Choke is a serious upgrade for anyone running a 10 gauge on spring gobblers. Rob Roberts built his name around aftermarket turkey chokes that are cut to tighter tolerances than factory tubes, and the Final Strut line is where the 10 gauge crowd gets in on it. This one is threaded for Invector-pattern barrels and comes with a .680 constriction, which is right in the sweet spot for packing pellets into a tight, lethal core where it counts.
What the Final Strut Does on the Pattern Board
The whole point of a choke like this is pattern density, and the Final Strut delivers it through internal cuts designed to stack more pellets inside a tight circle at turkey-killing yardage. Rob Roberts chokes are known for a hotter core pattern, meaning more hits in the head and neck zone at the kind of distances where a factory tube starts opening up. The .680 constriction is tight for a 10 gauge given the roughly .775 bore, so you're really squeezing the shot column down before it leaves the barrel.
Built From 17-4 Stainless to Handle the Heavy Stuff
Rob Roberts turns these chokes from 17-4 PH U.S. stainless steel, the same material the serious turkey choke makers lean on because it stands up to heavy buffered loads season after season. That matters in a 10 gauge, where the big magnum turkey shells put real stress on a tube. It plays well with a range of modern turkey loads, so you can dial in the combination that patterns best out of your particular gun.
Making Sure It Fits Your 10 Gauge
This is the Invector-threaded version, so it's made for 10 gauge barrels using the standard Invector choke system, like many Browning pumps and semi-autos chambered for the 10. Choke threads are not universal across makers, so matching the tube to your barrel's thread pattern is the key step before you pattern it. Get it threaded in, run a few loads across paper, and you'll find the combo that puts the most pellets in the kill zone.
Key Specifications
- Manufacturer: Rob Roberts Gun Works
- Model: Final Strut Turkey Choke
- Manufacturer Part Number: 200167
- UPC: 810174900767
- Gauge: 10 Gauge
- Thread Pattern: Invector
- Constriction: .680
- Material: 17-4 PH U.S. Stainless Steel
- Finish: Stainless Steel
- Choke Type: Turkey
- Style: Extended
What’s Included
- Rob Roberts Final Strut Turkey Choke (10 Gauge Invector, .680)
Frequently Asked Questions
What shotguns does the Final Strut 10 gauge choke fit?
This version is cut for 10 gauge barrels that use the standard Invector choke system, which covers a lot of Browning 10 gauge pumps and semi-autos. Choke threads aren't interchangeable between manufacturers, so confirm your barrel is Invector-threaded before ordering. If you're unsure, check the markings on your barrel or the stock choke that came with the gun.
What constriction is the Final Strut 10 gauge choke?
It carries a .680 constriction, which is a tight turkey setup for the 10 gauge. Since a 10 gauge bore runs around .775, that works out to a heavy squeeze on the shot column for a dense, concentrated core pattern. It's built to wring the most density out of modern turkey loads at range.
What is the Final Strut choke made of?
Rob Roberts machines the Final Strut from 17-4 PH U.S. stainless steel, the go-to material for turkey chokes that have to handle heavy buffered magnum loads. That toughness matters in a 10 gauge, where the big shells put real pressure on the tube. It's built to hold up shot after shot, season after season.
Will I need to pattern my gun after installing this choke?
Yes, patterning is the step you don't want to skip. Every barrel and load combination shoots a little differently, so run a few of your turkey loads across paper at your expected hunting distance. That tells you exactly which shell throws the densest core out of your gun with this choke.



Reviews
There are no reviews yet.