Description
The Johnny Stewart T2 Triple Threat is the mid-range piece of the Rob Roberts Gun Works Triple Threat lineup, and it fills the sweet spot most 20 gauge shooters live in. Where the T1 opens things up for close, fast targets and the T3 reaches out to the far edge, the T2 is dialed in for those in-between distances. Think flooded timber mallards backpedaling into the hole, dove ripping across a sunflower field, most sporting clays presentations, and 16-yard trap. It threads into the standard Invector pattern found on plenty of Browning and Winchester 20 gauge guns.
What Sets the T2 Triple Threat Apart
This choke is machined from 17-4 PH U.S. stainless steel, then heat treated, so it holds up to steel, lead, and non-toxic loads without babying it. Rob Roberts cuts these in a single lathe cycle, running the outside and the inside constriction without ever pulling the tube from the jaws. That means true concentricity and a choke that won't wander your point of impact. These run a touch longer than a lot of stock and aftermarket tubes on purpose, since a longer choke helps hold the pattern together downrange.
Picking the Right Triple Threat for Your Gun
Here's the part worth knowing before you buy. The Triple Threat system is bore-size driven, not just choke-constriction driven. Rob Roberts recommends the T2 for shotguns with smaller bore diameters and the T3 for guns with larger bores. If you're chasing everyday duck and dove work at reasonable range with a 20 gauge, the T2 is the workhorse of the three. It's earned a following among waterfowlers and clay shooters who care more about consistent, killing patterns than raw shell velocity.
Made in the USA and laser engraved for quick identification in the blind or on the station, the T2 is a straightforward upgrade for anyone who wants their 20 gauge to pattern the way it should.
Key Specifications
- Model: T2 Triple Threat Invector
- Gauge: 20 Gauge
- Choke Thread Pattern: Invector
- Constriction Range: Mid-range
- Material: 17-4 PH U.S. Stainless Steel
- Construction: Heat treated, single-cycle machined
- Shot Compatibility: Steel, lead, and non-toxic loads
- Country of Origin: Made in USA
- Manufacturer: Johnny Stewart / Rob Roberts Gun Works
- Manufacturer Part Number: 200137
- UPC: 810174900460
What’s Included
- One T2 Triple Threat Invector 20 Gauge choke tube
Frequently Asked Questions
What kind of shooting is the T2 Triple Threat best for?
The T2 is the mid-range choke in the Triple Threat family, built for the distances where most shots happen. It shines on flooded timber mallards, dove, most sporting clays presentations, and 16-yard trap. If you want one choke to cover everyday duck and clay work with a 20 gauge, this is the one to grab.
Should I choose the T2 or the T3 Triple Threat?
It comes down to your barrel's bore diameter. Rob Roberts recommends the T2 for shotguns with smaller bores and the T3 for guns with larger bores. The T2 also throws a slightly more open pattern than the T3, so it's the better call for mid-range work rather than stretching to the far edge of your range.
Will the T2 handle steel and non-toxic shot?
Yes. It's machined from 17-4 PH U.S. stainless steel and heat treated, so it's rated for steel, lead, and exotic non-toxic loads. That makes it a solid choice for waterfowl hunting where non-toxic shot is the norm.
Does this choke fit my 20 gauge shotgun?
This model is cut for the standard Invector thread pattern, which is common on many Browning and Winchester 20 gauge guns. Before ordering, check that your barrel uses the Invector system and not Invector Plus, Benelli Mobil, or another pattern, since they are not interchangeable. Matching the thread pattern to your gun is the key step.





Reviews
There are no reviews yet.