0
0

Rob Roberts T3 Triple Threat Invector Plus 12 Gauge Choke Tube

UPC: 810174900385

$85.99

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Rob Roberts built the Triple Threat series to give hunters and clay shooters a matched set of constrictions for different ranges, and the T3 is the one you reach for when the shot is at the far edge of your comfort zone. It sits at the tight end of the lineup, roughly in improved modified to light full territory, which makes it the go-to for pass shooting waterfowl, dropping high flyers, and breaking those long trap targets that a factory tube tends to let sail through.

What Makes the T3 Triple Threat Reach

This choke is engineered to squeeze your load into a dense, even pattern downrange without leaving the gaps that plague a lot of steel shot at distance. The internal geometry is the result of years of pattern testing and development, and it shows in how consistently it prints shot to shot. Pair it with a quality high-velocity load, spend a little time at the pattern board, and you'll see where it earns its keep past 40 yards.

Built From 17-4 PH Stainless

Every T3 Triple Threat is machined from 17-4 PH US stainless steel and heat treated, then held to tolerances well beyond the industry norm. That means it shrugs off moisture, mud, and the kind of abuse a duck blind or trap field dishes out, so it stays looking and functioning right season after season. The tube is laser engraved so you can spot the constriction at a glance when you're switching setups in the field.

Fits Invector Plus 12 Gauge Shotguns

This version is threaded specifically for Browning and Winchester Invector Plus 12 gauge barrels, including the SX2, SX3, and SX4 platforms. It's rated safe with lead, steel, and exotic non-toxic shot, so you can run it for waterfowl in the morning and clays in the afternoon without swapping tubes. Always confirm your barrel's thread pattern before installing, and give it a fresh pattern check with whatever load you plan to shoot.

Key Specifications

  • Model: T3 Triple Threat
  • Manufacturer: Rob Roberts Gun Works
  • Manufacturer Part Number: 200129
  • UPC: 810174900385
  • Gauge: 12 Gauge
  • Choke Configuration: Invector Plus
  • Approximate Constriction: Improved Modified / Light Full (long range)
  • Material: 17-4 PH US Stainless Steel, Heat Treated
  • Style: Extended
  • Shot Compatibility: Lead, Steel, Exotic Non-Toxic
  • Country of Origin: United States

What’s Included

  • Rob Roberts T3 Triple Threat Invector Plus 12 gauge choke tube

Frequently Asked Questions

What constriction is the T3 Triple Threat choke?

The T3 is the tightest of the three Triple Threat constrictions, landing in the improved modified to light full range depending on your barrel. Rob Roberts designed it specifically as a long-range choke for reaching out on distant targets. It's the one you want for pass shooting and long trap presentations rather than close, fast work.

Will this choke fit my shotgun?

This model is threaded for Browning and Winchester Invector Plus 12 gauge barrels, which covers guns like the SX2, SX3, and SX4. Invector Plus is not the same as standard Invector or Invector DS, so check your barrel or manual before ordering. If your gun uses a different thread pattern, Rob Roberts offers the T3 in other configurations.

Can I shoot steel and non-toxic loads through the T3?

Yes. The T3 Triple Threat is rated safe with lead, steel, and exotic non-toxic shot, which is part of what makes it a versatile pick for waterfowl and clays alike. As with any tighter choke, it's worth patterning steel loads to confirm you're getting an even spread at your intended range.

What is the T3 choke best used for?

It shines at the far edge of your effective range, so think high-flying ducks and geese, pass shooting, and long trap targets. For closer and faster shooting like skeet or teal, the more open T1 or mid-range T2 are the better tools. Many shooters keep all three on hand and swap based on the day's setup.

Additional information

UPC

810174900385

Manufacturer

Manufacturer Part Number

200129

Caliber/Gauge

12 Gauge

Reviews

There are no reviews yet.

Be the first to review “Rob Roberts T3 Triple Threat Invector Plus 12 Gauge Choke Tube”