Description
Rob Roberts earned his reputation the hard way, patterning thousands of shotguns on some of the only computerized shot analyzers in the country. The T2 is the middle child of his Triple Threat lineup, sitting between the more open T1 and the tighter, longer-reaching T3. Roughly a light modified constriction, it's the tube most folks reach for when the birds are working the decoys or the clays are breaking somewhere in that comfortable middle distance.
Where the T2 Triple Threat Earns Its Keep
Think flooded timber mallards dropping into the hole, dove crossing a field edge, most sporting clays presentations, and 16-yard trap. This is the sweet spot for the T2, which is tuned to hold an even, workable pattern in that 25 to 45 yard window without over-tightening and leaving gaps a bird could slip through. Plenty of waterfowlers keep this one screwed in as their everyday tube because it covers so much of what they actually shoot.
Built From 17-4 PH Stainless the Right Way
The T2 is machined from 17-4 PH U.S. stainless steel, so it stands up to steel, Hevishot, Black Cloud, Blindside, buckshot, and other non-toxic loads without babying it. Rob Roberts cuts these in a single lathe cycle, running the outside and the inside constriction without ever pulling the tube from the jaws. That approach keeps everything concentric, which is a big part of why the choke holds its point of impact shot after shot.
Making Sure It Fits Your Shotgun
This version is threaded for the 12 gauge Invector Plus system, the longer tube designed for back-bored Browning and newer Winchester barrels. Invector Plus and Standard Invector do not interchange, so check the stamp on your barrel near the receiver before ordering. Once it's in, pattern your gun with the loads you plan to hunt or shoot to confirm you're getting the coverage you want.
Key Specifications
- Manufacturer: Johnny Stewart / Rob Roberts Gun Works
- Model: T2 Triple Threat
- Manufacturer Part Number: 200128
- UPC: 810174900378
- Gauge: 12 Gauge
- Choke System: Invector Plus
- Constriction Range: Mid-range (approximately Light Modified)
- Effective Range: Roughly 25 to 45 yards
- Material: 17-4 PH U.S. Stainless Steel
- Style: Extended
- Shot Compatibility: Lead, steel, and non-toxic loads including Hevishot, Black Cloud, and Blindside
What’s Included
- Rob Roberts T2 Triple Threat 12 Gauge Invector Plus choke tube (1)
Frequently Asked Questions
What range is the T2 Triple Threat choke best for?
The T2 is the mid-range tube in the Triple Threat lineup, sitting around a light modified constriction. It's tuned to hold even, effective patterns in the 25 to 45 yard window. That makes it a strong pick for flooded timber mallards, dove, sporting clays, and 16-yard trap.
Will this choke fit my shotgun?
This tube is threaded specifically for the 12 gauge Invector Plus system found on back-bored Browning and many newer Winchester barrels. Invector Plus and Standard Invector do not interchange, so check the stamp on your barrel near the receiver before ordering. If it reads Invector Plus, you're good to go.
Can I shoot steel and non-toxic loads through the T2?
Yes. The T2 is machined from 17-4 PH stainless steel and is rated for lead, steel, and a wide range of non-toxic loads like Hevishot, Black Cloud, and Blindside. Rob Roberts suggests skipping the fastest velocity loads since they tend to pattern a little worse, but the choke itself can handle them.
How is the T2 different from the T1 and T3 chokes?
The Triple Threat line skips traditional choke labels on purpose. The T1 runs close to a skeet constriction for closer work, the T2 is roughly light modified for mid-range shots, and the T3 tightens up for longer reach. The T2 is the versatile middle ground that covers most everyday hunting and clays distances.



Reviews
There are no reviews yet.