Description
The Johnny Stewart Rob Roberts Gun Works T1 Triple Threat is the short-range member of the Triple Threat family, and it earns its keep when targets are close and the action is quick. Think skeet fields, decoying teal, and quail busting out of cover. Instead of squeezing everything into a tight core, the T1 throws a wide but uniform spread that gives you a forgiving pattern and consistent pellet distribution, so a slightly rushed swing still connects. This 20 gauge version drops into Beretta Optima HP threaded barrels, covering the A400 family and the 1301.
What Sets the T1 Triple Threat Apart
Rob Roberts built his name doing custom barrel and choke work, and that background shows here. The tube is machined from 17-4 PH U.S. stainless steel to tolerances well past the everyday standard, which is part of why these hold up shot after shot and keep patterns repeatable. It's rated for lead, steel, and the exotic non-toxics, so you're not stuck picking loads around the choke. Guys running these tubes report tight, consistent patterns across a range of shells, from bismuth to standard steel.
Picking the Right Triple Threat for the Job
The Triple Threat lineup is a three-tube system. The T1 handles your close work, the T2 steps out to mid-range for flooded timber mallards, dove, sporting clays, and 16-yard trap, and the T3 reaches out for the long stuff like high flyers and distant trap. Plenty of hunters find the T1 and T2 cover the majority of real-world shots in a 20 gauge, but if you shoot a wide mix of distances, the full set gives you a tube for every situation.
Installation is straightforward. With the gun unloaded, back out your existing tube, thread the T1 in by hand until snug, and check it now and then during use. Give it a wipe-down after a wet hunt and it'll keep patterning like day one. For close-flushing birds and quick clay targets, this is a tube worth having in the bag.
Key Specifications
- Manufacturer: Johnny Stewart / Rob Roberts Gun Works
- Model: T1 Triple Threat
- Manufacturer Part Number: 200118
- UPC: 810174900279
- Gauge: 20 Gauge
- Choke System: Beretta Optima HP
- Constriction Range: Short / Close Range
- Material: 17-4 PH U.S. Stainless Steel
- Shot Compatibility: Lead, Steel, and Exotic Non-Toxic
- Fits: Beretta Optima HP barrels (A400 family, 1301)
- Best Use: Skeet, Teal, Quail
- Country of Origin: USA
What’s Included
- Rob Roberts T1 Triple Threat Optima HP choke tube (20 Gauge)
Frequently Asked Questions
What range is the T1 Triple Threat choke made for?
The T1 is the close-range tube in the Triple Threat lineup, built for quick shots at skeet, decoying teal, and flushing quail. It produces a wide but uniform pattern that stays forgiving on fast targets. When birds are working in tight, this is the tube you want threaded in.
Will this choke fit my shotgun?
This version is cut for the Beretta Optima HP choke system in 20 gauge, which covers the A400 family and the 1301. Optima HP tubes are not interchangeable with the older Optima or Optima Plus systems, so check your barrel markings before ordering. If your barrel is threaded for Optima HP, it drops right in.
Can I shoot steel and non-toxic loads through the T1?
Yes. The T1 is rated for lead, steel, and exotic non-toxic shot, so you can match your load to the hunt without worrying about the choke. Hunters have patterned these tubes with everything from bismuth to standard steel and reported tight, consistent results.
Do I need the full Triple Threat set or just the T1?
It depends on the distances you shoot. The T1 handles close work, the T2 covers mid-range, and the T3 reaches out to longer targets. Many 20 gauge hunters find the T1 and T2 cover most real-world situations, but the full three-tube set gives you a dedicated choke for every distance.



Reviews
There are no reviews yet.