Description
The Rob Roberts T3 Triple Threat is the tightest choke in the Triple Threat family, and it's the one you reach for when the birds or clays are hanging out at the far edge of your range. Rob Roberts himself describes the T3 as roughly an improved modified constriction, purpose-built as a long-range tube rather than a jack-of-all-trades. If your T1 handles the close skeet-style work and the T2 covers that comfortable 25 to 45 yard window, the T3 picks up where they leave off and keeps the pattern dense downrange.
What the T3 Triple Threat Brings to the Range
This is a long-range choke through and through. Whether you're passing high-flying ducks over the decoys or breaking those long trap targets that seem to float forever, the T3 keeps pellets grouped tight so you're putting energy on target where an open choke would let them scatter. The design focuses on dense, consistent patterns shot to shot, which is exactly what you want when there's real distance between you and what you're aiming at.
Built From 17-4 PH Stainless, Made in the USA
Every Triple Threat tube is machined from 17-4 PH U.S. stainless steel and heat treated, so it stands up to moisture, mud, and the kind of grime that comes with a hard day in the blind or on the range. Rob Roberts machines these to tolerances beyond the usual industry standard, and the tubes are laser engraved so you can tell your chokes apart at a glance. The stainless build also means it plays nice with lead, steel, and exotic non-toxic loads, so you're not boxed into one type of shell.
Fitment and Setup for the Crio Plus 20 Gauge
This version is cut for the 20 gauge Benelli Crio Plus thread pattern, covering guns like the M2, Cordoba, Super Sport, Ethos, and SBE3. As with any new choke, spend a little time at the pattern board with a few different loads before you count on it in the field. Chokes and shells are a matchmaking game, and finding the load your barrel likes is what turns a good choke into a great one.
Key Specifications
- Manufacturer: Johnny Stewart / Rob Roberts Gun Works
- Model: T3 Triple Threat
- Manufacturer Part Number: 200105
- UPC: 810174900149
- Caliber/Gauge: 20 Gauge
- Thread Pattern: Benelli Crio Plus
- Constriction: Long Range (approx. Improved Modified)
- Material: 17-4 PH U.S. Stainless Steel
- Shot Compatibility: Lead, Steel, Exotic Non-Toxic
- Intended Use: Long-range waterfowl, trap, high-flying targets
- Origin: Made in the USA
What’s Included
- Rob Roberts T3 Triple Threat Crio Plus 20 Gauge choke tube
Frequently Asked Questions
What constriction is the Rob Roberts T3 Triple Threat?
The T3 is the tightest of the three Triple Threat chokes and is built specifically as a long-range tube. Rob Roberts describes it as roughly an improved modified constriction. It's the choke to grab when you need dense patterns out at the far edge of your effective range rather than for close, fast work.
Will this T3 choke fit my 20 gauge shotgun?
This particular tube is threaded for the 20 gauge Benelli Crio Plus pattern, which covers guns like the M2, Cordoba, Super Sport, Ethos, and SBE3. Always double check your barrel's thread pattern before ordering since the same T3 constriction is offered in other thread styles too. If you're unsure, look at the markings on your existing factory choke.
Can I shoot steel and non-toxic loads through the T3?
Yes. The T3 is machined from heat-treated 17-4 PH stainless steel and is rated safe for lead, steel, and exotic non-toxic loads. That makes it a flexible pick whether you're on the range or in the duck blind.
How do I get the best patterns out of the T3 Triple Threat?
Spend some time at the pattern board with a few different shells before you rely on it. Chokes and loads are a matched pair, and the same tube can pattern very differently depending on the ammo you feed it. Once you find the load your barrel prefers, you'll see just how dense and consistent this choke can be at distance.





Reviews
There are no reviews yet.