Description
The Area 419 Zero S-Series .22 GT Sizing Die takes the hard-won features from the company's flagship M-Series and packs them into a traditional 7/8" die body that threads into just about any standard press. If you shoot the .22 GT and care about low runout and repeatable neck tension, this is the die that does the heavy lifting on your reloading bench. It's full-length sizing from neck to extractor, so your brass comes out true and cycles smoothly in the chamber.
What Sets the Zero S-Series .22 GT Die Apart
The standout here is the precision ground expander mandrel. Every die ships with a .002" neck tension mandrel, and if you turn necks or want different tension, Area 419's separate mandrel kit lets you step through increments. The mandrel approach tends to give cleaner, more consistent neck tension than a traditional expander ball, and reloaders running these report runout hovering right around nothing. The sizing chamber is reamer cut to exact dimensions for a true size, which means you aren't fighting a sticky bolt after a couple of firings.
Features Built Into This .22 GT Sizing Die
Spring ejection handles spent primers cleanly, and the steel decapping pins are user replaceable when the day comes. Area 419 also built in hydraulic shoulder pressure relief, which reduces stress on the shoulder during sizing and helps your brass live longer. The whole thing is machined from stainless steel and made in the USA, which is the kind of build quality folks have come to expect from this crew.
Fitting the .22 GT Die to Your Setup
This is a die-only product, so no shellholder is included. It works with common shellholders from Redding, Hornady, RCBS and others, and it also pairs with Area 419's own Zero Modular Shellholder System. Whether you're loading precision match ammo or building hunting loads, this die slots right into a single-stage or progressive workflow and delivers the kind of consistency that shows up on target.
Key Specifications
- Manufacturer: Area 419
- Model: Zero S-Series Sizing Die
- Cartridge: .22 GT
- Die Style: Full-Length Sizing Die
- Die Body: Standard 7/8" Thread
- Material: Stainless Steel
- Included Mandrel: .002" Neck Tension
- Primer Ejection: Spring Ejection
- Decapping Pin: Replaceable Steel
- Country of Origin: Made in USA
- Manufacturer Part Number: 419-ZERODIE-S22GT
- UPC: 810080183209
What’s Included
- Zero S-Series .22 GT Sizing Die
- Area 419 Zero Universal Die Ring
- .002" Neck Tension Mandrel (installed)
- Spare Decapping Pin
- Install/Removal Tools
Frequently Asked Questions
Does the Area 419 Zero S-Series .22 GT die come with a shellholder?
No, this is a die-only product and does not include a shellholder. It's compatible with common shellholders from Redding, Hornady, RCBS and similar brands, and it also works with Area 419's Zero Modular Shellholder System. You'll want to grab the correct shellholder for the .22 GT separately if you don't already have one.
Will this die fit a standard reloading press?
Yes. The Zero S-Series uses a traditional 7/8" die body, so it threads into standard single-stage and progressive presses. Reloaders have reported running it successfully in presses like the Rock Chucker along with Area 419's own Zero press.
What neck tension does the .22 GT die come set up for?
Every Zero S-Series die ships with a precision ground .002" neck tension mandrel installed. If you want to adjust tension or you turn your case necks, Area 419 sells a separate mandrel kit that gives you additional increments. The mandrel design is known for delivering very consistent neck tension and low runout.
Does this die handle shoulder bump and neck sizing in one step?
Yes. It's a full-length sizing die that handles shoulder bump and neck sizing with the mandrel in a single stroke of the press. The reamer-cut chamber sizes to true dimensions, which helps avoid the sticky bolt feel that can show up after a few firings.



Reviews
There are no reviews yet.