0
0

Area 419 ZERO S-Series 6.5x47mm Lapua Full-Length Sizing Die

UPC: 810080183162

$275.00

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Area 419 built its name on precision reloading gear, and the ZERO S-Series Sizing Die for 6.5x47mm Lapua is their take on what a traditional full-length die should be. They pulled as many features as possible from the higher-end M-Series and packed them into a standard 7/8-inch body, which means it threads right into common presses like the Rock Chucker and Co-Ax, along with Area 419's own Zero press. If you shoot 6.5x47mm Lapua for competition, varmint work, or just like your handloads tight and consistent, this die earns its spot on the bench.

What Sets the ZERO S-Series 6.5×47 Die Apart

This die handles full-length neck-to-extractor sizing and runs a precision-ground expander mandrel, so you get your shoulder bump and neck tension dialed in on a single stroke of the press. It ships with a .002 neck tension mandrel, and because the mandrels are interchangeable, you can fine-tune tension by adding the separate Mandrel Kit for .0005 increments. Reloaders who normally run a separate mandrel step have found the built-in mandrel delivers the same uniform neck tension without the extra handling.

Built to Size True, Every Time

The die body is machined from 17-4 stainless steel and finished with a nitride coating for smooth operation and long life. Area 419 reamer-cuts these to exacting dimensions for a true size, which is their way of saying no more sticky bolt after the second firing. You also get hydraulic shoulder pressure relief, spring ejection for spent primers, and replaceable steel decapping pins. It's made in America from front to back.

Setting Headspace on the 6.5x47mm Lapua S-Series Die

Unlike the micrometer-adjustable M-Series, the S-Series uses a standard method for setting headspace, which keeps the design simple and the price reasonable. Pair it with the Area 419 Zero Modular Shellholder System and you can tune shoulder bump in fine increments, though it works just as well with standard shellholders from Redding, Hornady, and RCBS. Feedback from handloaders consistently points to low runout and uniform neck tension across full batches, even on a single-stage press.

Key Specifications

  • Manufacturer: Area 419
  • Caliber: 6.5x47mm Lapua
  • Die Type: Full-Length Sizing Die
  • Die Body: Standard 7/8-inch thread
  • Material: 17-4 Stainless Steel, Nitride Finished
  • Included Mandrel: .002 Neck Tension Mandrel
  • Headspace Setting: Standard (non-micrometer)
  • Shellholder Compatibility: Redding, Hornady, RCBS, Area 419 ZERO Modular
  • Country of Origin: Made in USA
  • Manufacturer Part Number: 419-ZERODIE-S6547
  • UPC: 810080183162

What’s Included

  • Area 419 ZERO S-Series 6.5x47mm Lapua Sizing Die
  • Area 419 ZERO Universal Die Ring
  • .002 neck tension expander mandrel (installed)
  • Spare decapping pin
  • Install/removal tools

Frequently Asked Questions

Does the 6.5x47mm Lapua S-Series die come with a shellholder?

No, this is a die-only product and does not include a shellholder. It works with common shellholders from Redding, Hornady, and RCBS, as well as the Area 419 ZERO Modular Shellholder System. If you want fine control over shoulder bump, the Zero Modular system is worth looking at.

Will this die fit a standard reloading press?

Yes. The current production S-Series dies use a traditional 7/8-inch die body designed to thread into standard presses, including the Rock Chucker and Co-Ax, along with the Area 419 Zero press. Reloaders report it running smoothly on single-stage setups like the Rock Chucker.

How does the built-in mandrel handle neck tension?

The die ships with a precision-ground .002 neck tension mandrel that sizes the neck and bumps the shoulder in a single stroke. The mandrels are interchangeable, so you can add the separate Mandrel Kit to get .0005 increments from .0005 to .0025. Handloaders who typically run a separate mandrel step have found the integrated mandrel produces the same consistent results.

What's the difference between the S-Series and the M-Series die?

The M-Series features micrometer-adjustable headspace and modularity at a higher price point. The S-Series brings over most of the core features, including the expander mandrel, hydraulic shoulder pressure relief, and reamer-cut dimensions, but uses a standard headspace setting method in a traditional 7/8-inch body to keep things simpler and more affordable.

Additional information

UPC

810080183162

Manufacturer

Manufacturer Part Number

419-ZERODIE-S6547

Reviews

There are no reviews yet.

Be the first to review “Area 419 ZERO S-Series 6.5x47mm Lapua Full-Length Sizing Die”